bids are invited for repair, maintenance, and installation of plant/ systems/equipments (version 2) - commercial; special neonatal care unit; service provider dimensions and operating characteristics:- bed height from floor 920mm bed tilting 10° in both head &feet sides heater heads swivel 90° both directions heater height 1765mm height 1830mm length 1010mm mattress size 530mm x 670mm max capacity of bed 10 kg side wall material acrylic 5mm, dropdown side walls height 100mm wheels 4.3inch casters with brakes width 565mm electrical environmental and operating characteristics:- display type 7 segment display examination light led,7 watt heater design ss with parabolic reflector heater type and output quartz, 600 w operating humidity range 10 to 90% rh operating temperature range -26.5°c to 40°c set temperature (servo mode) 32- 37.5 c skin temperature display 25 to 48 supply frequency 50 to 60 hz supply voltage 180 to 240 vac heating modes:- servo/manual/pre-warm fully auto mode heater output can be adjusted in steps of 10% first 5 minutes at 100% heater output next three minutes at 50% heater output shifts in the server mode with default baby set temperature at 36.5° audio- visual alarms:- check patient alarm:- sounds of alarm every 15 minutes in manual mode high skin temperature:- above 1°c of set temperature high temperature cut off:- auto cut-off of heater over 38°c low skin temperature:- below 1°c of set temperature sensor displacement alarm:- when sensor is displaced from the baby skin should have following standard accessories:- iv pole:- ss material iv pole with four hooks monitor tray thermistor temperature sensor should have future provision for the following options:- alarm mute apgar timer c to f toggle button countdown timer heater power bar graph should have following ease of operation parameters:- ▪ clear audio visual alarms for easy understanding of situation. ▪ easy touch buttons to regulate & set bay temperature and heater power. ▪ ergonomically placed control panel with clear easy to read led display ▪ provision for providing undersurface phototherapy ▪ swivelling heater head, ss iv poles, monitor trays, drawer or trays for keeping baby and provision for x ray cassette holder makes managing baby treatment easier. ▪ three operational modes for best thermal support- pre-warm, manual & servo mode should have provision for following optional accessories:- bracket oxygen cylinder holder x-ray cassette hol total quantity :