Tender Result - Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Commercial; Special Neonatal Care Unit; Service Provider Dimensions And Operating Characteristics:- Bed Height From floor 920mm Bed Tilting 10° In Both Head &Feet Sides Heater Heads Swivel 90° Both Directions Heater Height 1765mm Height 1830mm Length 1010mm Mattress Size 530mm X 670mm Max Capacity Of Bed 10 KG Side Wall Material Acrylic 5MM, Dropdown Side Walls Height 100mm Wheels 4.3inch Casters With Brakes Width 565mm Electrical Environmental And Operating Characteristics:- Display Type 7 Segment Display Examination Light LED,7 Watt Heater Design SS With Parabolic Reflector Heater Type And Output Quartz, 600 W Operating Humidity Range 10 To 90% RH Operating Temperature Range -26.5°C To 40°C Set Temperature (Servo Mode) 32- 37.5 C Skin Temperature Display 25 To 48 Supply Frequency 50 To 60 Hz Supply Voltage 180 To 240 VAC Heating Modes:- Servo/Manual/Pre-Warm Fully Auto Mode Heater Output Can Be Adjusted In Steps Of 10% first 5 Minutes At 100% Heater Output Next Three Minutes At 50% Heater Output Shifts In The Server Mode With Default Baby Set Temperature At 36.5° Audio- Visual Alarms:- Check Patient Alarm:- Sounds Of Alarm Every 15 Minutes In Manual Mode High Skin Temperature:- Above 1°C Of Set Temperature High Temperature Cut Off:- Auto Cut-Off Of Heater Over 38°C Low Skin Temperature:- Below 1°C Of Set Temperature Sensor Displacement Alarm:- When Sensor Is Displaced From The Baby Skin Should have following Standard Accessories:- IV Pole:- SS material IV pole with four hooks Monitor Tray Thermistor Temperature Sensor Should have future provision for the following Options:- Alarm Mute APGAR Timer C to F Toggle Button Countdown Timer Heater Power Bar Graph Should have following Ease Of Operation parameters:- ▪ Clear Audio Visual Alarms For Easy Understanding Of Situation. ▪ Easy Touch Buttons To Regulate & Set Bay Temperature And Heater Power. ▪ Ergonomically Placed Control Panel With Clear Easy To Read LED Display ▪ Provision For Providing Undersurface Phototherapy ▪ Swivelling Heater Head, SS IV Poles, Monitor Trays, Drawer Or Trays For Keeping Baby And Provision For X Ray Cassette Holder Makes Managing Baby Treatment Easier. ▪ Three Operational Modes For Best Thermal Support- Pre-Warm, Manual & Servo Mode Should have provision for following Optional accessories:- Bracket Oxygen Cylinder Holder X-Ray Cassette Hol Total Quantity :

7864946

Public Health And Family Welfare

Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Commercial; Special Neonatal Care Unit; Service Provider Dimensions And Operating Characteristics:- Bed Height From floor 920mm Bed Tilting 10° In Both Head &Feet Sides Heater Heads Swivel 90° Both Directions Heater Height 1765mm Height 1830mm Length 1010mm Mattress Size 530mm X 670mm Max Capacity Of Bed 10 KG Side Wall Material Acrylic 5MM, Dropdown Side Walls Height 100mm Wheels 4.3inch Casters With Brakes Width 565mm Electrical Environmental And Operating Characteristics:- Display Type 7 Segment Display Examination Light LED,7 Watt Heater Design SS With Parabolic Reflector Heater Type And Output Quartz, 600 W Operating Humidity Range 10 To 90% RH Operating Temperature Range -26.5°C To 40°C Set Temperature (Servo Mode) 32- 37.5 C Skin Temperature Display 25 To 48 Supply Frequency 50 To 60 Hz Supply Voltage 180 To 240 VAC Heating Modes:- Servo/Manual/Pre-Warm Fully Auto Mode Heater Output Can Be Adjusted In Steps Of 10% first 5 Minutes At 100% Heater Output Next Three Minutes At 50% Heater Output Shifts In The Server Mode With Default Baby Set Temperature At 36.5° Audio- Visual Alarms:- Check Patient Alarm:- Sounds Of Alarm Every 15 Minutes In Manual Mode High Skin Temperature:- Above 1°C Of Set Temperature High Temperature Cut Off:- Auto Cut-Off Of Heater Over 38°C Low Skin Temperature:- Below 1°C Of Set Temperature Sensor Displacement Alarm:- When Sensor Is Displaced From The Baby Skin Should have following Standard Accessories:- IV Pole:- SS material IV pole with four hooks Monitor Tray Thermistor Temperature Sensor Should have future provision for the following Options:- Alarm Mute APGAR Timer C to F Toggle Button Countdown Timer Heater Power Bar Graph Should have following Ease Of Operation parameters:- ▪ Clear Audio Visual Alarms For Easy Understanding Of Situation. ▪ Easy Touch Buttons To Regulate & Set Bay Temperature And Heater Power. ▪ Ergonomically Placed Control Panel With Clear Easy To Read LED Display ▪ Provision For Providing Undersurface Phototherapy ▪ Swivelling Heater Head, SS IV Poles, Monitor Trays, Drawer Or Trays For Keeping Baby And Provision For X Ray Cassette Holder Makes Managing Baby Treatment Easier. ▪ Three Operational Modes For Best Thermal Support- Pre-Warm, Manual & Servo Mode Should have provision for following Optional accessories:- Bracket Oxygen Cylinder Holder X-Ray Cassette Hol Total Quantity :

Nandurbar

Maharashtra

Refer document

22-08-2025