tender for supply of fabricated half circular straight and bend types shielding plate (ss-304) for different location of boiler at katpp, jhalawar , shielding plate for psh inlet header tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular outer 45° bend type shielding plate, tube size(?57x7mm), plate length=400 mm, plate height=150mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), bend angle=45° and clamp size- thickness= 2.5 and od= 68 mm , shielding plate for psh inlet header tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular inner 90° bend type shielding plate, tube size (?57x7mm), plate length=400 mm, plate height=150mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), bend angle=90° clamp size- thickness= 2.5 and od= 68 mm , shielding plate for final reheater (frh) tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular inner 90° bend type shielding plate, tube size (?57x4.5mm), plate length=1000 mm, plate height=200 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=90 mm), bend angle=90° clamp size- thickness= 2.5 and od= 68 mm , shielding plate for front hra tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular s-type bend shielding plate, tube size (?44.5x5.5mm) plate length=800mm, plate thickness =2.5 mm, plate periphery dimension (?d/2=70mm), bend angle=22.5°x 2, clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for front hra tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular straight- shielding plate, tube size(?44.5x5.5mm) plate length=1500 mm, plate thickness =2.5 mm, plate periphery dimension (?d/2=70mm), clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for ltsh upper & lower banks with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular straight type shielding plate, tube size(?57x7mm), plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=90 mm), clamp size- thickness= 2.5 and od= 68 mm , shielding plate for economizer upper & lower banks with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular straight type shielding plate, tube size(?51x6mm), plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), clamp size- thickness= 2.5 and od= 62 mm , shielding plate for economizer upper & lower banks with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular outer l-type / 90° bend shielding plate, tube size(?51x6mm), plate length=800 mm, plate height=200 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), bend angle=90°, clamp size- thickness= 2.5 and od= 62 mm , shielding plate for economizer intermediate banks with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular inner l-type 90° bend shielding plate, tube size(?51x6mm), plate length=1500 mm, plate height=400 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), bend angle=90°, clamp size- thickness= 2.5 and od= 62 mm , shielding plate for economizer intermediate banks with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular outer l-type 90° bend shielding plate, tube size(?51x6mm), plate length=1500 mm, plate height=400 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), bend angle=90°, clamp size- thickness= 2.5 and od= 62 mm , shielding plate for water wall screen tubes (water wall extended tube) with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular straight type shielding plate, tube size(?66.7x8mm), plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=104 mm), clamp size- thickness= 2.5 and od= 77.7 mm , shielding plate for intermediate ltsh with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) for soot blowing zone half circular inner l-type 90° bend type shielding plate, tube size (?57x7mm), plate length=800 mm, plate height=400 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for economizer with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular inner 90° bend type shielding plate, tube size(?51x6mm), plate length=800 mm, plate height=300 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), clamp size- thickness= 2.5 and od= 62 mm , shielding plate for economizer inlet header with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular outer 45° bend type shielding plate, tube size(?51x6mm), plate length=1000 mm, plate height=200 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), clamp size- thickness= 2.5 and od= 62 mm , shielding plate for water wall hanger tube with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular straight type shielding plate, tube size(?82.5x11mm), plate length=2000 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=130 mm), clamp size- thickness= 2.5 and od= 93.5 mm , shielding plate for front hra near roof header with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular ?-type bend shielding plate, tube size(?44.5x5.5mm) plate length=800mm, plate thickness =2.5 mm, plate periphery dimension (?d/2=70mm), clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for ltsh intermediate (upper side 90° bend with straight length shielding) with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular 90° bend type shielding plate, tube size(?57x7mm), plate length=1000 mm, plate height=400 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh intermediate (lower side 90° bend with straight length shielding) with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular 90° bend type shielding plate, tube size(?57x7mm), plate length=800 mm, plate height=300 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh intermediate (near rear wall (up)) with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular outer 90° bend type shielding plate, tube size(?57x7mm), plate length=1500 mm, plate height=300 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh offset bend (psh inlet header) left side with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular shielding plate, tube size(?57x7mm), plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), approximate plate length=1000 mm, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh offset bend (psh inlet header) right side with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular shielding plate, tube size(?57x7mm), plate thickness =2.5mm, plate periphery dimension(?d/2=90mm), approximate plate length=1000 mm, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for plsh coil tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) for soot blower zone half circular straight type shielding plate, tube size(?44.5x8mm), plate length=1500 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=70mm), clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for fsh coil tubes near soot blower area with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) for soot blower zone half circular straight type shielding plate, tube size(?51x8mm), plate length=1500 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=80mm), clamp size- thickness= 2.5 and od= 62 mm , shielding plate for frh coil tubes near soot blower area with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) for soot blower zone half circular straight type shielding plate, tube size(?57x4.5mm), plate length=1500 mm, plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), clamp size- thickness= 2.5 and od= 68 mm , shielding plate for economizer hanger tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular straight type shielding plate, tube size(?51x10mm), plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=80 mm), clamp size- thickness= 2.5 and od= 62 mm , shielding plate for primary reheater (prh) tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular inner 90° bend type shielding plate, tube size (?57x4.5mm), plate length=300 mm, plate height=300 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=90 mm), bend angle=90° clamp size- thickness= 2.5 and od= 68 mm , shielding plate for primary reheater (prh) tubes with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular outer 90° bend type shielding plate, tube size (?57x4.5mm), plate length=500 mm, plate height=300 mm, plate thickness= 2.5mm, plate periphery dimension (?d/2=90 mm), bend angle=90° clamp size- thickness= 2.5 and od= 68 mm , shielding plate for primary reheater terminal offset bend with clamp (1 set= 1 no. shielding plate and 2 nos. clamp) half circular shielding plate, tube size(?57x4.5mm), plate thickness =2.5mm, plate periphery dimension (?d/2=90mm), approximate plate length=1000 mm, clamp size- thickness= 2.5 and od= 68 mm