supply of fabricated half circular straight and bend types shielding plate ( ss-304 ) for different location of boiler of 2x600 mw, katpp, rvunl, jhalawar supply of fabricated half circular straight and bend types shielding plate ( ss-304 ) for different location of boiler , shielding plate for psh inlet header tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular outer 45° bend type shielding plate, tube size ( ?57x7mm ) , plate length=400 mm, plate height=150mm, plate thickness =2.5mm , plate periphery dimension ( ?d / 2=90mm ) , bend angle=45°and clamp size- thickness= 2.5 and od= 68 mm , shielding plate for psh inlet header tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular inner 90° bend type shielding plate, tube size ( ?57x7mm ) , plate length=400 mm, plate height=150mm, plate thickness =2.5mm , plate periphery dimension ( ?d / 2=90mm ) , bend angle=90° clamp size- thickness= 2.5 and od= 68 mm , shielding plate for final reheater ( frh ) tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular inner 90° bend type shielding plate, tube size ( ?57x4.5mm ) , plate length=1000 mm, plate height=200 mm, plate thickness= 2.5mm , plate periphery dimension ( ?d / 2=90 mm ) , bend angle=90° clamp size- thickness= 2.5 and od= 68 mm , shielding plate for front hra tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular s-type bend shielding plate, tube size ( ?44.5x5.5mm ) plate length=800mm, plate thickness =2.5 mm, plate periphery dimension ( ?d / 2=70mm ) , bend angle=22.5°x 2, clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for front hra tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular straight- shielding plate, tube size ( ?44.5x5.5mm ) plate length=1500 mm, plate thickness =2.5 mm , plate periphery dimension ( ?d / 2=70mm ) , clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for ltsh upper & lower bankswith clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular straight type shielding plate, tube size ( ?57x7mm ) , plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=90 mm ) , clamp size- thickness= 2.5 and od= 68 mm , shielding plate for economizer upper & lower banks with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular straight type shielding plate, tube size ( ?51x6mm ) , plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=80 mm ) , clamp size- thickness= 2.5 and od= 62 mm , shielding plate for economizer upper & lower banks with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circularouter l-type / 90° bend shielding plate, tube size ( ?51x6mm ) , plate length=800 mm, plate height=200 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=80 mm ) , bend angle=90°, clamp size- thickness= 2.5 and od= 62 mm , shielding plate for economizer intermediate banks with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular inner l-type 90° bend shielding plate, tube size ( ?51x6mm ) , plate length=1500 mm, plate height=400 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=80 mm ) , bend angle=90°, clamp size- thickness= 2.5 and od= 62 mm , shielding plate for water wall screen tubes ( water wall extended tube ) with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular straight type shielding plate, tube size ( ?66.7x8mm ) , plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=104 mm ) , clamp size- thickness= 2.5 and od= 77.7 mm , shielding for intermediate ltsh with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) for soot blowing zone half circular inner l-type 90° bend type shielding plate, tube size ( ?57x7mm ) , plate length=800 mm, plate height=400 mm, plate thickness =2.5mm , plate periphery dimension ( ?d / 2=90mm ) , bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding for economizer with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular inner 90° bend type shielding plate, tube size ( ?51x6mm ) , plate length=800 mm, plate height=300 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=80 mm ) , clamp size- thickness= 2.5 and od= 62 mm , shielding for economizer inlet header with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular outer 45° bend type shielding plate, tube size ( ?51x6mm ) , plate length=1000 mm, plate height=200 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=80 mm ) , clamp size- thickness= 2.5 and od= 62 mm , shielding plate for water wall hanger tube with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular straight type shielding plate, tube size ( ?82.5x11mm ) , plate length=2000 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=130 mm ) , clamp size- thickness= 2.5 and od= 93.5 mm , shielding plate for front hra near roof header with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular ?-type bend shielding plate, tube size ( ?44.5x5.5mm ) plate length=800mm, plate thickness =2.5 mm, plate periphery dimension ( ?d / 2=70mm ) , clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for ltsh intermediate ( upper side90° bend with straight length shielding ) with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular 90° bend type shielding plate, tube size ( ?57x7mm ) , plate length=1000 mm, plate height=400 mm, plate thickness =2.5mm , plate periphery dimension ( ?d / 2=90mm ) , bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh intermediate ( lower side90° bend with straight length shielding ) with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular 90° bend type shielding plate, tube size ( ?57x7mm ) , plate length=800 mm, plate height=300 mm, plate thickness =2.5mm , plate periphery dimension ( ?d / 2=90mm ) , bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh intermediate ( near rear wall ( up ) ) with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular outer 90° bend type shielding plate, tube size ( ?57x7mm ) , plate length=1500 mm, plate height=300 mm, plate thickness =2.5mm , plate periphery dimension ( ?d / 2=90mm ) , bend angle=90°, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh offset bend ( psh inlet header ) left side with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular shielding plate, tube size ( ?57x7mm ) , plate thickness =2.5mm, plate periphery dimension ( ?d / 2=90mm ) , approximate plate length=1000 mm, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for ltsh offset bend ( psh inlet header ) right side with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular shielding plate, tube size ( ?57x7mm ) , plate thickness =2.5mm, plate periphery dimension ( ?d / 2=90mm ) , approximate plate length=1000 mm, clamp size- thickness= 2.5 and od= 68 mm , shielding plate for plsh coil tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) for soot blower zone half circular straight type shielding plate, tube size ( ?44.5x8mm ) , plate length=1500 mm, plate thickness =2.5mm, plate periphery dimension ( ?d / 2=70mm ) , clamp size- thickness= 2.5 and od= 55.5 mm , shielding plate for fsh coil tubes near soot blower area with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) for soot blower zone half circular straight type shielding plate, tube size ( ?51x8mm ) , plate length=1500 mm, plate thickness =2.5mm, plate periphery dimension ( ?d / 2=80mm ) , clamp size- thickness= 2.5 and od= 62 mm , shielding plate for frh coil tubes near soot blower area with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) for soot blower zone half circular straight type shielding plate, tube size ( ?57x4.5mm ) , plate length=1500 mm, plate thickness =2.5mm, plate periphery dimension ( ?d / 2=90mm ) , clamp size- thickness= 2.5 and od= 68 mm , shielding for economizer hanger tubes with clamp ( 1 set= 1 no. shielding plate and 2 nos. clamp ) half circular straight type shielding plate, tube size ( ?51x10mm ) , plate length=1500 mm, plate thickness= 2.5mm, plate periphery dimension ( ?d / 2=80 mm ) , clamp size- thickness= 2.5 and od= 62 mm