supply and installation of open gym equipment at panniyannur grama panchayath in thalasseri lac, kannur - retender open gym equipment and interlock block laying , open gym equipment , od84136/2025-2026 :single bar - supply and installation of single bar having the following specifications: dimensions: (l x w x h) 3550 x 2590 mm. main frame - made from ø48 mm od “b” class g.i. pipe. frame of single bar – ø33 mm od “b” class g.i. pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. top closing cap’s - decent design size pp / hdpe / ms. material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in cement concrete stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart – made from aluminum / stainless-steel stick-on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing , od84137/2025-2026 :horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame – is made by ø 48 mm od “b” class gi pipe. seat frame – is made byø 48 mm od “b” class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of ø 48 mm od “b” class g.i. pipe. angle between link and ground position is 10-20 degree. handle - ø 33 mm od “b” class gi pipe. paddle vertical support - &osl