tender for - lt reconductoring at kokkad transformer areal under electrical section,chengamanad- transporting lt abc by hired vehicle to a distance up to 5km and carrying upto 2 drum incl loading & unloading using crane 2 stringing of 1.1 kv aerial bunchedcable of size 3 x 70 + 1 x 16+1x 50sqmm with bare/insulated messengerthrough existing poles 3 loading lt psc pole from the stackingplace and unloading the same at worksite (transport by vehicle). 4 transporting poles by hired vehicle to adistance upto 5km and carrying upto 4poles excluding loading & unloading. 5 loading ht psc pole from the stackingplace and unloading the same at worksite (transport by vehicle) 6 insertion of one ht psc pole in existingline incl. digging & backfilling pit,fitting cross arm, insulators, binding etc 7 erecting one lt psc pole in positionincl. digging & back filling pit. 8 fitting and providing one ht stay for11kv pole incl. digging & back fillingpit 9 providing stay for lt poles incl.digging & back filling pit. 10 providing one coil earth using gi earthwire, digging separate pit at standarddistance away from the pole/structure &backfilling. 11 fitting one no. section fuse on lt linewith dropping cables, crimping sockets,connecting with bolt&nut etc 12 erection of anchor clamp / dead endclamp for lt abc of any size 13 providing cable tie 14 providing end caps 15 installation of insulation piercingconnector for main to service line main:16-95 sqmm, tap 16-95 sqmm 16 installing one no. insulation piercingconnector of size main :16 to 95,tap:1.5 to 16 sq.mm 17 installing one no. 4 way satelliteconnector of size main :16 to 95, tap:4to 35 sq.mm to the lt ab cable ofstandard size 18 erection of suspension clamp for ltabc of any size 19 dismantling (without damage) one kmlt 3ph 4 wire oh line, cross arms,insulators and stacking the conductors inrolls 20 dismantling (without damage) one kmlt additional conductor line, cross arms,insulators and stacking the conductors inrolls 21 installation of pre-insulated straightthrough joints for 16sqmm cable 22 installation of pre-insulated straightthrough joints for 70sqmm cable 23 installation of pre-insulated straightthrough joints for 50sqmm cable 24 renewal of existing damaged/broken oldlt stay with existing stay rod. 25 additional rate for excavation of one pitfor lt pole/lt stay in laterite 26 straightening one slanted lt pole afterunbinding the line and rebinding the lineafter work 27 reconductoring one km lt sph 2 wireoh old line with new acsr rabbitconductor incl. conveyance of materials 28 dismantling and reconnecting sphservice connection from the oh lineincl. lowering down the wp portion 29 insertion of one lt psc pole in existingsph oh line incl. digging & back fillingpit, fitting cross arm, insulator, bindingetc. 30 renewal of existing damaged/old ltstay with new stay in place and refittingof all items and conveyance of allmaterials. 31 renewal of existing damaged/old ltpsc/rcc (sph line) pole with new pscpole in place and refitting of all items incl. conveyance (except pole) 32 dismantling one lt 2 line cross armfrom existing pole. 33 fitting one lt 2 line cross arm on ht orlt existing poles incl. fitting insulatorsand binding the same with lt line 34 dismantling (without damage) one ltpsc/rcc pole after disconnecting stays,strut etc. and stacking the same. 35 renewal of existing damaged/old ltpsc/rcc (3ph line) pole with new pscpole in place and refitting of all itemsincl. conveyance (except pole). 36 dismantling (without damage) one kmlt sph 2 wire oh line, cross arms,insulators and stacking the conductors inrolls. 37 dismantling one ordinary streetlight/cfl/led fitting from existing poleand refitting the same on newly erectedpole and reconnecting 38 fitting of one no. pole top serviceconnection box of standard size (up to 4way) using ss strap/b&n of suitable sizein to the psc/a poles at the standardheight excluding giving connections 39 providing one earth using earth pipeincl. digging separate pit at standarddistance away from the pole/structure &backfilling please enable macros to view boq information