tender for modification work at dg’s office of c-dac ip building, pune.; 1 modification work 2 dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by engineer-in-charge 3 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc 4 dismantling ofcementconcrete member by mechanical meansusing pneumatictools, breakingtopiecesnotexceeding0.02cuminvolumeandstockpilingatdesignated locationsanddisposalofdismantledmaterialsuptoaleadof1000metres,stacking serviceable and unserviceable materials separately etc. complete 5 taking out windows grill by cutting/ removing edges including stacking within 50 metres lead 6 disposal of debris: loading to trauck, the generated debris outside of cdac campus, etc complete 7 providing and laying telephone black / amba white / cadburybrown / ruby red / ocean brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on c.m. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 8 providing and fixing in position upvc aluminium sliding door : with following specification, make : fenista only. (note : sholud match the existing pattern in building) system: luxury slider (upvc)design: slider door xixcolour : pristine white slider of : no bugscreen no monsoon guardslider sash : s65 ps1slider threshold : with threshold/65mmhandle colour : whitehnd inner track : espag patio handlehnd outer track : espag patio handlemech joint : nohurricane bar : nobug mesh : noneglazing : dg ins tgh(6t+15+6t)mmwith all required fitting, etc completed 9 providing and installation stainless steel nylon coated grills for safety.specifications of invisible grillsmaterial – stainless steel wire ropewire diameter –2.5mmfinish – teflon coated wire rope, smoothusage/application – windowsdesign – vertical & horizontalwater absorption zeromoisture content zeromaterial grade – ss 316position – exteriorfeature – rust proofsurface treatment – powder-coated channels, nylon coated wire rope, spacing between two ss wire rope should be 3inch/ 75mm c/c 10 providing and applying interior wall finish luster of approved make on internal wall surface as detailed below scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. scrapping with emery paper 180 and wipe clean. applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller scrapping emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and oil with roller 19 to 21% after 8 hours of activity applying 2nd coat or wall finish lustre with mineral turpentine 7 to 9 % with brush and oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (with prior approval of s.e.)