tender for maintenance, repair and various development works of bharat ratna pandit bhimsen joshi art gallery-item no: 1 providing and applying interior wall finish luster of approved make on internal wall surface as detailed below scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. scrapping with emery paper 180 and wipe clean. applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller scrapping emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and oil with roller 19 to 21% after 8 hours of activity applying 2nd coat or wall finish lustre with mineral turpentine 7 to 9% with brush and oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (with prior approval of s.e.) (ssr item no: 36:20) (pmc bhavan) unique no (15594) rate list year (2024-2025) item no:2 providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture spintone/cosmos/hexa or equivalent of size 585mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at 12 gm/sq.m including both sides)consisting of main trunner suitably spaced at joints to get required length and size 24x38mm, made from 0.33mm thick(minimum) sheet, spaced 1200mm center to center and cross t of size 24x28mm made of 0.33mm thick(minimum) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings, fixtures smoke detectors etc., wherever required. main t runners xuxnended from celling with using g.i. slotted cleats of size 25x35x1.6 mm fixed to celing using 12.5mm dia. and bumm long dash fasteners, 4mm g.1 adjustable rods with galvanized steel levela clips of size 85x30x0.8mm, spaced at 1200mm center to center along main t bottom exposed with 24mm of all t-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc, complete. (currently this item should be used only for vip cabina) (ssr item no: 38.39) (pmc bhavan) unique no (15660) rate list year (2024-2025) item no:3 providing and fixing 100 mm dia stabiliser pipe/ p.v.c. noil vest/waste pipe and with necessary fixtures and fitting such as benda, tees, single junctions, slotted vent, clamps etc, complete. (ssr item no: 42.52) (pmc bhavan) unique no (15904) rate list year (2024-2025) item no:4 fiber cushion chairs providing (uhnet make) fiber cushion chairs of supremo neelkamal brand note:-cushion should be on both seat & backrest (ssr item no: 62.32) (pmc bhavan) unique no (16580) rate list year (2024-2025) item no:5 providing & arrangemnt of mid back, eco cts mechanism fixed armrest, gaslift for seat height adjustment, standard 5-prong p/nylon base with fabric upholstery (ssr item no: 51.43) (pmc bhavan) unique no (16194) rate list year (2024-2025) item no 6 providing push back chairs of approved design.quality n colors as per site in charge instructions etc completed. ( including transport) (ssr llem no 62.35 ) (pmc bhavan) unique no (16583) rate list year (2024-2025) item no:7 supply and installation of translucent roof with dpi flux standing seam multicell polycarbonate panel system. the system with complete assembly of co extruded uv protected multicell panels incorporaled into a engine complete system co-extruded uv protected polycarbonate panel system of min 12 mm thick of 900 mm (min) width with angular daylighting concept. panels shall have minimum six layers with truss bridge design for higher flexibility & strengin, hanels with all hang ausus tour best performance for wind uplift vibration, oll canning and visual appearance. panels shall be manufactured with vertical standing sean at both sides of the panel. panels shall be fixed on purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on ms structure (will be paid separately) with 3 numbers self-drilling screws & trapezoid ss fasteners holding the base of the standing seam offering beat stability having a pull-out load of min. 7000n (7kn) tested as per 150 68:92 1998 and is 1608, 2005, as per design requirement panels must satisfy dart drop impact test as per 15 14443-97 shall show no sign of breakage on polycarbonate sheets which have been exposed to uv for a min of 500 hours as per astm g 155. panels shall not have yellowness index as per astm d 1925 of 15 units when tested on a sample exposed to uv for 500 hours as per astm g 155. u value shall not be more than 16 w/m2k as per en iso 10077-2-2018. panel shall be with additional end cap/aluminium u/f profile/ glazing bar for ends as required. panel shall be fixed over ms structural steel/ms purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. colour: as per approval. approved make: flux by dpi daylighting or approved equivalent the 12mm thick panels shall be used for a roofing height of upto 15 mirs ssr item no: 51 k-187) (pmc bhavan) unique no (16275) rate list year (2024-2025) item no: 8 providing and fixing 12 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded elc (151)) (ssr item no: 62.11) (pmc bhavan) unique no (16542) rate list year (2024-2025) 5 item no 9 providing and fixing 6 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded etc (151) (ssr item no 62.9) (pmc bhavan) unique no (16540) rate list year (2024-2025) item no: 10 laminates sheets 1 mm thick: providing and fixing laminates sheets as per company specification and fix it with levicol-recommended companies- formica, royal touch, marino, green lam, euro. (1 mm thick laminates sheets) (ssr item no: 62.23) (pmc bhavan) unique no (16566) rate list year (2024-2025) item no: 11 providing & fixing 1.5 teakwood moulding patti of approved design & siva os por eita in charge instruction etc. completed 1.5moulding patti (ssr item no: 62.42) (pmc bhavan) unique no (16590) rate list year (2024-2025) item no:12 providing & fixing all furniture hardware as per site in charge instructions including brase hinges, brass handles, godrej lock. magnets, and imported sliding channel hardware fittings (ssr item no: 62.49) (pmc bhavan unique no (16597) rate list year (2024-2025) item no: 13 providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of m.s. flats of size 18 x 5 mm tor e section for runner of minimum 40 x 6 mm size for flange, m.s. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade f.g. 150 fitted with snap headed rivets of minimum size 6 mm max sparing of vertical channels he 100 mm enclosed gate position and clear space of 150 mm between two sets of crassings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (is. 105211983). (ssr item no: 39.20) (pmc bhavan) unique no (15700) rate list year (2024-2025) 20