tender for business plan work 2024-25 under aloomandi division.- 1 loading unloading & carriage of material from store kesco to work site. 2 loading & unloading of 11 kv ( sp55 ) pole ( store to site ) 3 loading & unloading of 11 kv ( sp37 ) pole ( store to site ) 4 loading & unloading of damage pole ( site to store ) 5 11 kva ht xlpe cable 3x70 sqmm 6 11 kva ht xlpe cable 3x120 sqmm 7 11 kva ht xlpe cable 3x185 sqmm 8 11 kva ht xlpe joint box 9 loading & unloading of 250kva distribution transformer 11 / 0.43 kv 10 l.t. cable size 3.5x240 / 1x400 sqmm 11 erection of material 12 erection of single pole 13 erection of double pole 14 grouting of pole with cement brick ballast and coarse sand as per standard specification. 15 painting of steel tubular poles after rubbing, cleaning with emery paper and coating one coat of redoxide on full length of pole and then two coat of alumium paint upto x-arm from top including cost of paint and reoxide / paint used should be isi mark ist class enamel paint. 16 earthing of pole & pannel 17 dismenteling of pole 18 laying of sagging of conductor 19 making plinth of single pole of 400 m dia, 600mm. height ( 200mm underground ) with c.c. in ratio 1:4:8 of cement sand including cost of material. 20 digging and laying of 33 / 11 kva ht xlpe cable 21 construction of t / f plinth, suitable for mounting of distribution transformer size of the plinth will be 1.2×1.2×1.2 meter solid with brick work. 75mm. thick c.c. in ratioo 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75mm. thick done on all the exposed sides to the plinth. 22 fabrication and ercetion of distribution t / f fencing of frame size 3×2.4 mtr. including cost of m.s. angle size 40×40×5 and m.s. flat size 35×5, fixing of welded steel wire fabric on steel frams by welding of 10 swg wire fabric, including painting of two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including evening of oil & dust. 23 supply and earthing work of 40mm. dia classb g.i. pipe 80 long including m.s. flat 50×6mm. along with all related materials required for distribution t / f earthing work. 24 laying of 33 / 11 kva ht xlpe cable for hdd method 25 making of cable box 33 / 11 kva ht xlpe cable 26 mounting of cable box 33 / 11 kva ht xlpe cable 27 laying & digging of l.t. cablesize 3.5x240 / 1x400 sqmm 28 errection of 250kva distribution transformer 29 digging of pit size 2x2x2 30 opening of h.t. jumpers from the existing 3 phase 3 wire h.t. o.h. line for erection work. 31 opening of l.t. jumpers from the existing l.t. o.h. line for erection work. 32 making of h.t. jumpers from the existing 3 phase 3 wire h.t. o.h. line after erection work. 33 opening of l.t. jumpers from the existing l.t. o.h. line after erection work. 34 cutting of tree branches 35 supply and laying of g.i. & m.s. pipe 6 dia mtr. 36 fabrication of m.s. item 37 newely network system