tender for business plan work 2024-25 under phoolbagh division. - 1 loading unloading & carriage of material from store kesco to work site. 2 loading & unloading of 11 kv pole ( sp-37 ) 3 11 kva ht xlpe cable 3x70 sqmm 4 11 kva ht xlpe cable 3x185 sqmm 5 11 kva ht xlpe joint box 3x300 / 185 sqmm 6 loading & unloading of 250kvatransformer 7 l.t. cable 3.5x240 sqmm 8 straight through cable joint box 9 l.t. abc cable 3x95+1x70+1x16 sqmm 10 l.t. distribution box single phase / three phase 11 l.t. cable 1x25 12 loading unloading of other items 13 erection of material 14 erection of abc cable 3x95+1x70+1x16 15 erection of lt distribution box 16 erection of single pole 17 erection of double pole 18 grouting of pole with cement brick ballast and coarse sand as per standard specification. 19 painting of steel tubular poles after rubbing, cleaning with emery paper and coating one coat of redoxide on full length of pole and then two coat of alumium paint upto x-arm from top including cost of paint and reoxide / paint used should be isi mark ist class enamel paint. 20 earthing of pole 21 making plinth of single pole of 400 m dia, 600mm. height ( 200mm underground ) with c.c. in ratio 1:4:8 of cement sand including cost of material. 22 digging and laying of 11 kv xlpe cable 23 construction of t / f plinth, suitable for mounting of distribution transformer size of the plinth will be 1.2×1.2×1.2 meter solid with brick work. 75mm. thick c.c. in ratioo 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75mm. thick done on all the exposed sides to the plinth. 24 fabrication and ercetion of distribution t / f fencing of frame size 3×2.4 mtr. including cost of m.s. angle size 40×40×5 and m.s. flat size 35×5, fixing of welded steel wire fabric on steel frams by welding of 10 swg wire fabric, including painting of two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including evening of oil & dust. 25 supply and earthing work of 40mm. dia classb g.i. pipe 80 long including m.s. flat 50×6mm. along with all related materials required for distribution t / f earthing work. 26 laying of ht / lt xlpe cable 3x185 / 70 / 300 sqmm. for hdd method 27 making of cable box 3x185 / 70 / 300 sqmm. 28 mounting of cable box 3x185 / 70 / 300 sqmm. 29 making of straight through cable box 3x185 / 70 / 300 sqmm. 30 mounting of straight through cable box 3x185 / 70 / 300 sqmm. 31 errection of 250kva distribution transformer& connection of 250 kva 32 digging of pit size 2x2x2 33 opeing of h.t. jumpher 34 opeing of l.t. jumpher 35 jumpher of h.t. line 36 jumpher of l.t. line 37 cutting of tree branches 38 supply and laying of g.i. pipe 6 dia mtr. 39 supply and plinth of h.t.p.b. and errection 40 newely network system