notice inviting tender for setting up of vrdl bsl2 plus lab and instruments on turnkey basis for microbiology department-1. puf panel partition wall panel with aluminium coving 2. pre-painted ppgi standard ceiling panel ceiling work to be perform in sample collection, sample preparation, extraction room approximate 60 sq mt. prepainted pkb ppl standard ceiling panel made up of minimum 0.5 mm thick ppgi pre-painted sheet on both sides to be insulated with infill puf of density 40±2 kg/m3. color of ceiling panel shall be finalized after approval of user. 60 sq m (approx) 3. clean room door (900 mm x 2100 mm) gi powder coated pkb ppl double skin door with 44 mm leaf thickness made of 0.80 mm gi sheet for door leaf with honeycomb infill and door frame made of minimum 1.20 mm thick gi profile. accessories included. dead lock both side key operation, handles 300 mm, door closer, tower bolt, double glazed view glass 300 x 600 mm, drop down seal, door sea, ss 304 ball bearing hinges, door seal and kick plates upto 300 mm height on push side. 22 4. clean room double door (1500 x 2100 mm) gi powder coated pkb ppl double skin door with 44 mm leaf thickness made of 0.80 mm gi sheet for door leaf with honeycomb infill and door frame made of minimum 1.20 mm thick gi profile. accessories included. dead lock both side key operation, handles 300 mm, door closer, tower bolt, double glazed view glass 300 x 600 mm, drop down seal, door sea, ss 304 ball bearing hinges, door seal and kick plates upto 300 mm height on push side. 4 5. clean room view panel gi powder coated double glass fix window. size is 1000 x 1000 mm. 4 6. epoxy flooring epoxy on floor upto 3-4 mm layer with paint with powder coated. 1200 sq ft (approx) 7. air conditioner 1.5 ton, 5 star rating split type air conditioners complete with indoor unit (idu), outdoor unit (odu), surface / concealed copper refrigerant piping with installation 3 8. air curtain should be high quality air curtains, should be made up of galvanized powder coated sheets, should be provide with hepa filter (0.3 micron) installed above the main entrance/door of the lab to restrain the outside air into the laboratory at the time of entry or exit; velocity >18m/s 3 9. exhaust fan in autoclave room 1 10. pass box outer dimension: approx. 2’ x 2’ x 2’ (l×w×h) main body of system should be made up of ss-304 18 gauge stainless steel. it should have audio alarm for opened door. system must have user friendly keyboard/switch light and uv. should have both side openable and auto lock facility. system should be ce and en certified