tender for construction of aam sc hanker-earth work in excavation by mechanical means (hydraulic excavator) overareas (exceeding 30cm indepth,1.5minwidthaswellas10sqmonplan) including getting out and disposal of excavated earth lead upto 50m and lif tupto1.5m, as directed by engineer-in-charge. a) all kinds of soil 2 c) ordinary rock 3 dumping stone including cost of stones. in horizontal on level 4 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5 random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete1:6:12(1cement :6 coarses and:12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) 6 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) : 3 graded stone aggregate 20 mm nominal size) 8 filling availableexcavatedearth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 9 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) : 3 graded stone aggregate 20 mm nominal size). 10 steel reinforcement for r.c.c.work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more. 11 providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry upto floor five level including hoisting and setting in position in mud mortar using approved quality mud with carriage of material complete. 12 providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 13 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia & length (holdfast lugs or dash fastener shall be paid for separately).second class kail wood 14 providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge.(note:-butt hinges and necessary screws shall be paid separately) second class kail wood 35 mm thick shutters 15 providing and fixing factory made upvc white colour casement/casement cum fixed glazed windowscomprising of upvc multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), upvc extruded glazing beads of appropriate dimension, epdm gasket, stainless steel (ss 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, g.i fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of engineer-in-charge. (single / double glass panes andsilicon sealant shall be paid separately). variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.for upvc frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth& width of profile shall be acceptable.upvc profile should be tested by bsi(uk) & skz(germany)@25000weathering hours casement window single panel with s.s. friction hinges (400 x 19 x 1.9 mm) made of(big seriesframe 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 0.75 sqm.) 16 providing and fixing factory made upvc white colour sliding glazed doorcomprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to upvc profile), appropriate dimension upvc extruded glazing beads, upvc extruded interlock and upvc extruded inline sash adaptor (if required), epdm gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extreme panels along with zinc plated mild steel multipoint locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (ss 304 grade) body with adjustable double nylon rollers (weight bearingcapacity to be 120 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessarystainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approved drawing & direction ofengineer-in-charge. (single / double glass panes, wire mesh and silicon sealent shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. for upvc frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.upvc profile should be tested by bsi(uk) & skz(germany)@25000weathering hours two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension.(area of door above 2.00 sqm upto 5.00 sqm) 17 providing and fixing traditionally carved wood work (shingstak) over doors and windows including all accessories as per the direction of the engineer in-charge, complete with; 2nd class kail wood 18 polishing in high gloss/matt finishmelamine clear polish onwoodwork in required color/wooden shade texture with following process in the sequence as detailed below:1. the surface to be polished is rubbed with sand paper 80/120 no. and thenwith sand paper of 160/180 nos. 2. applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3.on drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. on this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. this 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. the final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of engineer-in charge. (final coat to be done in 1 or 2 layers without gap of time.) 19 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) 20 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 21 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 22 providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. 23 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : newwork (two or more coats) over and including water thinnable priming coat with cement primer 24 finishing walls with water proofing cement paint of required shade : new work (two or more coats applied @ 3.84 kg/10 sqm) 25 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry and curing complete but excluding coat of nosing of steps etc complete. 50 mm thick with 20 mm nominal size stone aggregate 26 providing and fixing 12 mm thick pre laminated flooring of approved brand as per direction of engineer incharge, complete job ac-4 including carriage. 27 steelworkweldedinbuiltupsections/framedwork, includingcutting,hoisting, fixing in position andin gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 28 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approvedmake, in all colours and shades, laid on 20mm thick cement mortar1:4 (1 cement:4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the jointswithwhite cement and matching pigments etc., complete. size of tile 600x600 mm 29 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. this layer will be allowed to air cure for 4 hours (b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 30 marble stone flooring with 18mm thick marblestone, as per sample of marble approved by engineer-in-charge, over 20mm(average) thickbaseof cement mortar1:4 (1 cement :4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :udaipur green marble 31 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 32 centering and shuttering including strutting, propping etc. and removal of form work for : a) foundations, footings, bases for columns 33 b) lintels, beams, plinth beams, girders, bressumers and cantilevers 34 c) columns, pillars, piers, abutments, posts and struts 35 d) suspended floors, roofs, landings, balconies and access platform 36 e) edges of slabs and breaks in floors and walls under 20 cm wide 37 providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of m-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of engineer-in-charge. 38 carriage of material from source to site by m.t including loading, unloading and complete job a) cement an average lead upto 110km 39 b) sand an average lead 10kms 40 d) stone aggregate lead 85km 41 d) stone an average lead 10km 42 providingand fixingwater closet squattingpan (indian typew.c. pan )with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device (handle lever) conforming to is:7231, with all fittings and fixtures complete including cutting and making good the wall sand floors wherever required : white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests. 43 providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or european type water closet (anglo indian w.c pan) with seat &lid fixed with c.p. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: white vitreous china dual purpose wc pan with white solid plastic seat and lid with white vitreous china flushing cistern and c.p. flush bend. 44 providing and fixing wash basin with c.i. brackets, 15mm c.p. brass pilla rtaps, 32mm c.p. brasswaste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : whitevitreous china wash basin size 630x450mm with a pair of 15mm c.p. brass pillar taps. 45 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : rectangular shape 1500x450 mm 46 providing and fixing pvc soil waste and vent pipe of required dia including bends, tee door bend, l bend trap jointed with addhesive material isi marked like prince vector or equivalent brand all complete job.(external work). a) 100mm nominal inner dia .pipes. 47 b) 75 mm nominal inner dia pipes. 48 providing and fixing 3 layer pp-r (polypropylene random copolymer) pipes sdr 7.4uv stabilized & anti-microbial fusion welded, having thermal stability for hot &cold water supply including all pp-r plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. this includes the cost of cutting chases andmaking goodthe same including testingof joints complete as per direction of engineer in chajge. (concealed work including cutting chases and making good the walls etc.,)a) pn-16 pipe, 25 mm od (sdr-7.4) 49 b) pn-16 pipe, 32 mm od (sdr-7.4) 50 providing and fixing heat tape 33watton ppr pipes made of denforced or chromelox or equivalent make, as approved by engineer incharge , complete job 51 supply and installation of electrical undrefloor heating mats for floor heating systems non-corrosive, flexible heating elements including cables, pre formed cable mats including smart thermostat and digital electrical control panel all complete (stiebel eltron /danfoss or any other approved brand. 52 supply and installation of reflective bubble aluminium foil insulation/aluminium silver bubble sheet 210 gsm (7mm) thick light weight relflective insulation, max withstanding temperature 40 degree to +110 degree waterproof insulation all complete 53 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : 250 x 16mm 54 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : 300x16 mm 55 providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm 56 providing and fixing bright finished brass handles with screws etc. complete:100 mm 57 providing and fixing toilet paper holder : c.p. brass 58 providing and fixing ptmt liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms 59 providing and fixing 15 mm c.p brass angle 2 in 1 tap of approved quality conforming to is standards 60 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore 61 providingandfixingc.p.brasslongbodybibcockofapprovedqualityconforming to is standards and weighing not less than 690 gms. 15mm nominal bore. 62 providing and fixing c.p. brass extension nipple (size 15mm x 50mm ) of approved make and quality as per direction of engineer-in-charge. 63 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 64 supply, installation, testing and commissioning of exhaust fan of approved brand (havells/bajaj/crompton or any other approved brand as per engineer in charge including all fixture all complete 65 providing and fixing ptmt soap dish holder having length of138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. 66 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge. (a) 15 mm nominal dia 67 high water pressure s.s geyser connections pipe (2 feet long) of approved quality and make 68 providing and fixing 15mm c.p brass abs health faucet jet spray with hose and holder of approved quality conforming to isi standards (kohler/jaguar/cera) 69 supply, installation, testing and commissioning of geyser 15ltr capacity horizontally mounted of approved brand (havells/bajaj/crompton or any thoer approved brand as per engineer in charge including all fixtures, bolts all complete 70 supply, installation, testing and commissioning of geyser 35ltr capacity horizontally mounted of approved brand (havells/bajaj/crompton or any thoer approved brand as per engineer in charge including all fixtures, bolts all complete 71 providing and placing on terrace (at all floor five levels) polythene water storage tank with cover and suitable locking arrangemnt and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid isi license. 72 supplying and fixing high quality 32mm thick nitrile insulation tube, tapping with cello tape for water pipeline of approved quality and finish as per the direction of engineer of charge 73 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. 74 wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 no. 4 sq.mm frls pvc insulated copper conductor single core cable for loop earthing as required. 75 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 76 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 77 2 x 10 sq. mm + 1 x 6 sq. mm earth wire 78 4 x 16 sq. mm + 2 x 6 sq. mm earth wire 79 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 a switch 80 b) 3 pin 5/6 a socket outlet 81 c) tv antenna socket outlet 82 supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box/ wooden block including connections etc. as required. 83 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 84 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providng and fixing 1 nos. 3 pin 5/6 a modular socket outlet and 1 nos. 5/6 a modular switch, connections etc. as required. (for light plugs to be used in non residential buildings). 85 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. 86 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) a) 8 way (4 + 24), double door 87 b) 6 way (4 + 18), double door 88 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 89 supply and fixing of following rating 240/415 volts c series miniature circuit breaker suitable for lighting and other loads of following poles in the existing mcb db complete with connections, testing anda) spn 63 amp 90 b) tpn 63 amp 91 supplying and fixing 120 watt led street light complete with gi pipe bracket duly embeded along the parapet/wall.wipro lr02-132-xxx-57-g2 or equivalent approved make 92 supplying and fixing following luminaries as requiredll20-111-xxx-65ne3 wipro 10 watt led tube light fitting equivalent make and model philips/crompton greaves. 93 20 watt led tube light fitting.ll20-221-xxx-65ne3 wipro or equivalent and model philips/crompton greaves. 94 supplying and fixing of following electrical itemssuitable for operating on 240/230volts ac, 50 hz supply.including connections etc. as required.exhaust fan 300 mm size (heavy duty) cg transair or equivalent approved make 95 supply and fixing led type down lighter 10watt