tender for repair, painting and replace windows of c-type quarters at sewa vihar colony of sewa -ii power station, mashka (cw-702); 1 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 2 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : of area of 3 sqm. and below 3 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : of area beyond 3 sqm. 4 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead .for thickness of tiles 10 mm to 25 mm 5 providing and fixing factory made solid foam upvc profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. the profile shall be laminated on both sides, made from rigid foam sheets (single extruded) having density 600 kg/cum and the exposed edges sealed with pvc edge beading of same shade and colour. the frame shall be fire retardant with necessary screw holding capacity. frame shall be fixed to wall using expendable fastner with necessary stainless steel screws, all complete as per direction of engineer-in-charge 6 providing and fixing factory made kitchen cabinet shutter/partition 20mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (single extruded) having density 600 kg/cum and laminated on both side by laminate sheet/pvc foil lamination. the exposed edges shall be sealed with pvc edge beading of same shade and colour. the shutter shall be fire retardent having necessary screw holding capacity. shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of engineer-in-charge. 7 providing and fixing factory made upvc white colour sliding glazed window upto 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealent shall be paid separately). three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm)note: for upvc frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 8 providing and fixing factory made upvc white colour sliding glazed window upto 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealent shall be paid separately). two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm upto 2.50 sqm).note: for upvc frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9 providing float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) 10 providing m.s. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows. 11 providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required epdm rubber / neoprene gasket felt etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge (glazing, panelling and dash fasteners to be paid for separately.) for fixed portion anodized aluminum (anodized transparent or dyed to required shade according to is:1868, minimum anodic coating of grade ac 15) 12 providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in-charge. (only weight of grill to be measured for payment) 13 providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 14 repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters leadwith cement mortar 1:4 (1 cement : 4 fine sand) 15 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 16 providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick 17 wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade, one or more coats on old work. 18 finishing walls with acrylic smooth exterior paint of required shade: old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface 19 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 20 providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 21 centering and shuttering including strutting, propping etc. and removal of form for: foundations, footings, bases of columns etc. for mass concrete. 22 providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with is: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete 23 disconnecting damaged overhead/terrace pvc water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of engineer-in- charge. 24 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cutting and making good the walls etc.:25 mm dia. nominal bore 25 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) 26 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 25 mm nominal bore 27 painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :75 mm diameter pipes 28 painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :100 mm diameter pipes 29 providing and fixing 1st quality ceramic glazed floor tiles conforming tois : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 30 providing and fixing 15 mm nominal bore c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 31 providing and fixing 15 mm nominal bore c.p. brass angle valve for basin mixer and geyser points of approved make conforming to is : 8931 32 providing and fixing 15 mm nominal bore of standard back type c.p. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg 33 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cutting and making good the walls etc. internal work-exposed on wall : 15 mm dia nominal bore b) medium 34 providing and fixing cp brass single lever telephonic wall mixer ofquality & make as approved by engineer in charge.(a) 15 mm nominal dia 35 providing and fixing stainless steel a isi 304 (18/8) kitchen sink as peri.s. 13983 with c.i. brackets and stainless steel plug 40 mm, including paintingoffittingsandbrackets,cuttingandmakinggoodthewalls whereverrequired:kitchensinkwithoutdrainboard,610x510mm bowl depth 200mm. 36 providing and fixing vitreous china dual purpose closet suitable for use assquattingpanoreuropeantypewatercloset(angloindianw.c. pan)withseatandlidwithc.p.brasshingesandrubberbuffers,10 literlowlevelflushingcisternwithfittingandbrackets,40mmflush bend,20mmoverflowpipewithspecialsofstandardmakeand mosquitoproofcouplingofapprovedmunicipaldesigncomplete, includingpaintingoffittingsandbrackets,cuttingandmakinggood thewallsandfloorswhereverrequired:whitevitreouschinadual purposewcpanwithwhitesolidplasticseatlidwithwhitevitreous china flushing cistern andc.p. flush bend 37 providingandfixingisimarkedflushdoorshuttersconformingtois: 2202(parti)decorativetype,coreofblockboardconstructionwith frameof1stclasshardwoodandwellmatchedteak3plyveneering withverticalgrainsorcrossbandsandfaceveneers onboth facesof shutters.withisimarkedm.s.pressedbutthingesbrightfinishedof requiredsize with necessary screws: 30mm thick. 38 providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent ordyedto requiredcolourorshadewithnecessaryscrewsetc.complete :150x10 mm 39 providingandfixingaluminumhandlesisimarkedanodized(anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed torequiredcolourandshadewithnecessaryscrewsetc.complete.:125 mm 40 providingand fixingaluminum slidingdoor boltsisi markedanodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc.complete : 250x16 mm 41 providingandfixingonwallfaceunplasticisedrigidpvcrainwater pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.75 mm diameter 42 providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conformingtois:13592typea,includingjointingwithsealring conformingtois:5382,leaving10mmgapforthermalexpansionbend 87.5°: 75 mm bend 43 providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conformingtois:13592typea,includingjointingwithsealring conformingtois:5382,leaving10mmgapforthermalexpansion:single tee without door 75x75x75 mm