tender for strenthening and black topping from katharasapatti to uppar odai road km 0/0-1/30 r-406 at melur block under pugf 2025-26 r 50.39 lacs pkg 01.; strenthening and black topping from katharasapatti to uppar odai road km 0/0-1/30 r-406 at melur block under pugf 2025-26 r 50.39 lacs pkg 01 2 clearingthe scrub jungle including all labour charges for burrying and burning etc., 3 earth work excavation in all classes of soils except hard rock requiring blasting depositing on bank with initial lead of 10m and lift of 2m including all labour charges and incidental charges such as shoring, strutting, providing coffer dams, bailing out of water as per 20b 4 providing and laying us gravel to compacted thick including cost & conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by power roller to achieve the required proctor density at 100% compaction at optimum moisture content and hire & fuel charges for power roller , water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc, complete. 5 km 0 / 0 - 1 /0 6 km 1 / 0 - 1 / 30 7 providing and laying spreading and compacting graded stone aggregate to wet mix macadam(wmm) specification including premixing the material with water at omc in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete. 8 providing and laying of prime coat using emulsion at the rate of 7 kg per ten square meter over the wmm surface preparatory to another bituminous construction over it.therefor and all incidental charges etc., complete for top layer 9 providing and laying tack coat over the prime coat surface using 2.50 kg of bituminous emulsion for 10 sqm. including cost of bituminous emulsion which will be supplied by the department at section stores and its cost will be recovered as per special condition appended including labour charges for preparing the surface for laying tack coat and for applying required quantity of bituminous emulsion by mechanical sprayer including hire and fuel charges for all tools and plants employed etc., complete as per clause 503 of mort&h specification. 10 bituminous concrete 25/30/40 mm thick using cmp (grade-ii) providing and laying bituminous concrete to 25/30/40mm thick using 0.13 cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of vg30 bitumen for premixing per 10sqm including cost and conveyance of all materials to cmp site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t cmp with bitumen boiler, tipper trucks, paver finisher, vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete asper specification using cmp as per clause 507 of morth rev-5 11 km 0 / 0 - 1 /0 12 hm stone 13 provision for side marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface 14 sign board