tender for improvements of kathukuliroad in kotagiri town panchayat; 1 picking the existing surface 3 to 5 cm deep removal of picked up staff to the side berms and using the useful metal to the road hand packing to camber sectioning, levelling including labour charges for picking and other tools and plants etc., complete as per standard specifications. 404 ofmorth 2 providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (wmm ) specification including premixing the material with water at omc in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of morth specifications. 3 providing and laying prime coat of 7 kgs/10 sqm over the wmm surface treated with primer using 7 kgs of bituminous emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of morth rev v specifications 4 providing and laying tack coat of 2.5 kgs/10 sqm over the prime surface treated with binder using 2.5 kgs of bituminous emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of morth rev v specifications 5 providing and laying tack coat of 2.00 kgs/10 sqm over the prime surface treated with binder using 2.00kgs of bituminous emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of morth rev v specifications 6 providing and laying 50mm consolidated thick dense bituminous macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20kgs of vg30/vg40 bitumen for premixing per 10sqm including cost and conveyance of all materials to cmp site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by vibratory / pneumatic roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t cmp with bitumen boiler, tipper trucks, paver finisher /9m paver finisher, vibratory / pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using cmp as per clause 505 morth rev-5 7 providing and laying bituminous concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 45.27kgs of vg30 / vg40 bitumen and 5.03kgs of shredded plasticsfor premixing per 10sqm including cost and conveyance of all materials to cmp site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne vibratory / pneumatic roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t cmp with bitumen boiler, tipper trucks, paver finisher / 9m paver finisher, vibratory / pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using cmp as per clause 507 of morthrev-5. 8 road marking with hot applied thermo plastic compound with reflectorising glass beads on bituminious surface proving and laying of hot applied thermoplastic compound 2.5 mm thick inculding reflectorising glass beads @ 250gms per sqm area thickness of 2.5mm exclusive of surface applied glass beads as per irc: 35 the finished surface to be level uniform and free from streaks and holes inculding all charges etc.., complete