maintenance work daiviya apda edsd- rura-1 work by loading 8.5 meter long pcc pole on own vehicle from power station center panki / jainpur , transporting to the site and keeping it safely off ( by unpaved road ) . 2 from power storage center panki / jainpur, line material such as conductor cross arm insulator etc. should be loaded on own vehicle and transported to work place and safely unloaded ( by unpaved road ) . 3 pcc poles with all accessories like cross arm by digging pit in place of broken / damaged poles. installing earthing rod by tying disc pin insulator etc. 4 installation of new sectional double pole in place of broken / damaged double pole. 5 repair work of section double pole. 6 tightening the damaged stay by renosing. 7 tightening of loose wires ( each wire ) of 33 kv line 8 , tightening of loose wires ( each wire ) of lt and 11 kv line 9 according to the respo standard, straighten and erect the skewed poles of 33 / 11 kv line / lt line by tying all the accessories. 10 giving clearance while pruning the trees of 33 / 11 kv and lt line. 11 ac in 33 / 11 kv line s. r. jumpering and earthing ( each wire ) by tying stringing and sagging insulators in all the three phases by spreading the weasel conductor. replacement of damaged cross arm. 12