bids are invited for electrification work for providing 16 mtr long led high mast flood light details of measurement and calculation of quantities; 1 supply & fixing of 16 mtr. high mast shaft of approved make with rising system hot dip galvanized inside & outside dip, heaving pole sheet thickness 4 mm. top dia minimum 150mm, bottom dia 360mm base plate 32mm thick suitable for wing velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 hp power tool motor, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation bolts nuts, washers, anchor plates etc complete in all respects. (s.r. no. 21.3.1) 3 no. 2 supply and fixing of factory wired integral led flood light luminaires with die cast aluminium housing with toughend glass/uv stabilized pc cover and lenses built with mandatory driver set suitable for 170 watt to 200 watt. confirming to ip 66, ik 07 and above protection complete in all respect including labour. [s.r. no. 23.26] cat “aaa” 36 no. 3 s/f of 40amp. tpn automatic street light cubical control panel painting with anticorrosive and acid proof paint. h.r.c. fuse insulating switch metering complete in all respect. [s.r.807(f)] 3 no. 4 s/l of 252 mm 3.5 core aluminium cable pvc insulated armoured. (s.r.7.1.1) 180 mtr. 5 supply and burring of safe earthing electrode t-19 (hot dip galvanized), length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12 mm, outer gi pipe of 16 swg and inner gi pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 g.i . strip will be extra) [s.r.725.a] 12 no. 6 s/l of 40/50 mm hdpe pipe. (m.r.) 120 mtr. 7 s/f of plain type aluminum lug to the cable leeds included with tape and making connection etc. (s.r. 504 e) 36 no. 8 supply & fixing of led type single dome aviation obstruction light (m.r.) 3 no. 9 s/l of 4 mm 2 core cable under pole [s.r. 1.14.3] 120 mtr. 12 intercross road cutting work by buggi (m.r.) 3 job.