bids are invited for item no1 , item no2 , item no 3 , item no 4 total quantity : 40--1 supply and fixing of 12.5 mtr hight mast pole of approved make with rising system, hot dip galvanized inside & outside, having pole sheet thickness 3mm.top dia minimum 150mm, bottom dia mimium 310 mm base plate 25 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes, 0.75 hp power tool motor, required internal wiring, 3 point suspension system with steel wire rope 6mm dia, double drum winch including making suitable foundation as per manufacture drawing & site requirment along with foundation bolts, nuts, washers, anchor plates etc. complete in all respect as per direction and satisfaction to the engineer-in charge 2 supply and fixing of factory wired integral led flood light luminaires with die cast aluminium housing built with direver set suitable for 170 to 200 watt. confirming to ip 66 protection complete in all respect complete in all respect cat aaa 3 supply and fixing of 40 amp mcb automatic out door cubicle type control pannel for eye mast with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, isolating switch, metering instrument and instrument box with cts etc. complete in all respect. 4 supply and burring of safe earthing electrode t-19 (hot dip galvanized), length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12mm, outer gi pipe of 16 swg and inner gi pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 g.i. strip will be extra) make: as approved in u.p.p.w.d., & c.p.r.i. certified.