bids are invited for highmast pole - supply & fixing of 12.5 meter high mast lighting system pole of approved make with polygonal, tapered and flange mounted type, with rising system, totally hot dip galvanized inside and outside, having pole sheet thickness 3mm. bottom dia 310mm, base plate 25mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for 12.5 meter high mast such as head frame, lighting arrester, 0.75hp power tool motor, 6mm wire rope made of stainless steel, double drum winch, winch bracket, power trailing cable, integral power tool, compensating disc, galvanized lantern carriagesuitable for mounting of 6 luminaries ofenergy efficient led flood light. foundation as per manufacturer drawing and along with foundation bolts, nits, washers, anchor plate, etc. complete in all respect. ( pwd srl. no. 651 ) , highmast cable etc - supply & laying of 16 sq. mm. 4 core aluminium conductor pvc insulated armoured served sheathed cable, 1100 volts garde, at a depth of 750mm below ground level over a cushion of 75mm sand and all around protected with burnt bricks on sides and top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by engineer-in charge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clampsetc. ( pwd srl. no.501-i ) , highmast earthing electrod - supply & burying of safe earthing electrod t-39 ( hot-dip galvanized ) , length upto 3000mm, , outer pipe 76.3mm x 3.2mm inner pipe 42.4 x 2.6mm, terminal dia 12mm, coating 80- 100 micron filled with crystalline conductive mixture ( ccm ) having anti corrosive and conductive property with 50 kgs activated soil ( bfc ) capable of reducing the soil restivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover and masonry housing. ( from electrode terminal to switch board, cost of 25x3mm copper strip will be extra ) . make: as approved in u.p.p.w.d. &c.p.r.i. certified. ( pwd srl no. 727 ( d ) ) , highmast flood light - supply & fixing of factory wired integral led flood light luminaries with die cast aluminium housing and lenses built with mandatory driver set suitable for 120w. conforming to ip 65 / 66 protection complete in all respect. u.p.p.w.d. cat. reference aa / aaa approved. ( pwd srl. no. 1455 ) , highmast tpn - supply and fixing of 40 amp. tpn of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contractors, hrc fuse, isolating switch metering instrument and instrument box with cts etc. complete in all respect. ( pwd ) srl. no. 807 ( f-ii ) ) , highmast aviation - supply and fixing of single unit ledaviation obstruction light complete with transformer and led spiral etc. , highmast foundtation - making of concrete foundation & erection of high mast lights as per approved drawing or as per thedirection of engineer -in –charge. total quantity : 1