supply, installation and commissioning of pump sets with prime mover for non-kole padasekharams in thrissur district , supply, installation, testing and commissioning of centrifugal monoblock pump sets /close-coupled pumpsets, with following duty criteria, coupled with suitable electric motor tefc, fitted on a common base frame, with necessary fittings and couplings. the material of construction of impeller shall be cast iron/ carbon steel /bronze, and that of pump body is cast iron alloy, pump shaft shall be carbon steel. panel board with suitable starter for monoblock / close coupledpump, voltmeter, ammeter, mccb, elcb, single phase preventer, dry run preventer etc. electrical connections earthing and panel board are as per the kseb/electrical inspectorate norms. the length of suction pipe is approximately 7 m with flexible hose, and a delivery pipe shall be approximately 9 m length with flexible hose, both 150 mm or nearest size. the end of suction pipe be fitted with ci foot valve, and an additional strainer mesh 50 mm x 50 mm size at about 30 cm away from the foot valve. all accessories, fittings such as bend, priming arrangements hose collar hose clips etc., should be included. the quote should be inclusive of all petty civil works, electrical connections etc. drawings and connected papers should be submitted for obtaining electrical connections from eb duly signed by a registered electrical wireman, supervisor and contractor. the rate quoted should be inclusive of all the charges for supply, installation including petty civil works, trial run and commissioning, all type of transport and conveyance, loading and unloading charges, gst etc. , approximate duty point head 6 m, minimum discharge at duty point head: 70 lps; power allocation available at site 10 hp , approximate duty point head 16 m, minimum discharge at duty point head: 48 lps; power allocation available at site 20 hp , approximate duty point head 28 m, minimum discharge at duty point head: 48 lps; available power allocation 25 hp , approximate duty point head 23 m, minimum discharge at duty point head: 65 lps; available power allocation 30 hp