the supply, installation and commissioning of pump sets with prime mover for kuttadanpadam padasekharam in thrissur district the supply, installation and commissioning of pump sets with prime mover for kuttadanpadam padasekharam in thrissur district , supply, installation, testing and commissioning of centrifugal mono block pump sets, with following duty criteria, coupled with suitable electric motor tefc, fitted on a common base frame, with necessary fittings and couplings. the material of construction of impeller shall be cast iron / carbon steel / bronze, and that of pump body is cast iron alloy, pump shaft shall be carbon steel. panel board with suitable starter for monoblock / close coupled pump, voltmeter, ammeter, mccb, elcb, single phase preventer, dry run preventer etc. electrical connections earthing and panel board are as per the kseb / electrical inspectorate norms. the length of suction pipe is approximately 6m with flexible hose, and a delivery pipe shall be approximately 9m length with flexible hose, both 150 mm or nearest size. the end of suction pipe be fitted with ci foot valve, and an additional strainer mesh 50 mm x 50 mm size at about 30 cm away from footvalve. all accessories fittings such as bend, priming arrangements hose collar hose clips etc., should be included. a pump shelter with frp / grp portable cabin, corrosion resistant, size suitable with the foot area of the pump and accessories quoted ( 2m x 2m ) , 10 ft height with one door and two ventilators and without floor. a pump foundation of size suitable for the weight of pump quoted has to be provided in cement concrete 1:3:6 or richer mix. the quote should be inclusive of all petty civil works, electrical connections etc. drawings and connected papers should be submitted for obtaining electrical connections from eb duly signed by a registered electrical wireman, supervisor and contractor. the rate quoted should be inclusive of all the charges for supply, installation including petty civil works, trial run and commissioning, all type of transport and conveyance, loading and unloading charges, gst etc. , approximate duty point head 5 m, minimum discharge at duty point head: 65 lps; power allocation 7.5 hp , approximate duty point head 6 m, minimum discharge at duty point head: 70 lps; power allocation 10 hp