providing and fitting of hydrant / irrigation equipments and allied works at b.c park jammu.--- 1 providing and laying of g.i pipe of medium grade of parkash surya, jindal or tata make in dug out trenches including cutting, threading, making of joints, complete with sockets. the job includes digging of trenches for laying of pipeline including refilling of trenches ( depth of the trenches as per site conditions ) . 2 15mm dia 3 20mm dia 4 25mm dia 5 40mm dia 6 50mm dia 7 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and base support for the tank. 8 providing and fitting of 1 hp, single-phase monoblock pump / motor set of kirlosker, ksb, crompton and greaves or usha make. the job includes material, carriage and labour charges. ( head and discharge as per site conditions and as approved by site engineer ) 9 providing and fixing gun metal gate valve with c.l. wheel of approved quality ( screwed end ) . 10 15 mm nominal bore 11 20 mm nominal bore 12 providing and fixing ball valve ( brass ) of approved quality complete. 13 15 mm nominal bore 14 20 mm nominal bore 15 25 mm nominal bore 16 engagement of labour / mazdoor 17 providing and fitting spn of havells / l&t / wipro / indo kopp or equivalent make. 18 32amp spn. 19 40 amps spn. 20 63amp spn. 21 supplying and drawing following sizes of fr pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 22 2 core x1.5 mm sq. 23 providing and laying of armoured aluminum cable encased in 2.5 id ribbed flexible pvc hose pipe to act as conduit for cable of havells, anchor, finolex, polycab or equivalent make in dug out trenches. the job includes digging out trenches and laying of cable including refilling of trenches. 24 25 mm sq 4 core 25 providing and laying of armoured aluminum cable of havells, anchor, finolex, polycab or equivalent make in dug out trenches. the job includes digging out trenches and laying of cable including refilling of trenches. 26 16 mm sq 2 core. 27 hire charges of technicians engaged for the welding, fitting of damged parts of motor sheds, starter sheds, main panels, raising of motor sheds etc with other allied works. 28 welding set ( 01 nos ) 29 welder ( 01 nos ) 30 providing and fitting of 1.5 hp, single-phase monoblock pump / motor set of kirlosker, ksb, crompton and greaves or usha make. the job includes material, carriage and labour charges. ( head and discharge as per site conditions and as approved by site engineer ) 31 providing and fitting of ms ornamental shed 4’-0” x 2’-0” with ornamental roof of height 3’-0”. the ornamental shed is to be fabricated out of 16 gauge ms sheet with front door in two equal halves having proper bolting system. angle irons extended from four corners of the shed are to be grouted in cement concrete block. painting one coat of steel primer and two coats of synthetic enamel paint inside and outside is also included in the job.complete including all material required, labour and carriage charges. 32 providing and fitting of starter panel fitted with 32 amps contactor, over-load relay, single phase preventer, mcb tpn, amp meter, selector switch, push button etc. angle irons extended from corners of the panel are to be grouted in cement concrete block, painting of synthetic enamel paint inside and outside is also included in the job. complete including all material required, labour and carriage charges 33 providing and fitting of g.i.fittings. 34 ½” elbow 35 ½”union 36 ½” tee 37 ½” socket 38 ½” plug 39 ½” tank nipple 40 ½” cap plug 41 ½” x 2” nipple 42 ½” x 4”nipple 43 ½” x 6” nipple 44 ½” x 12” nipple 45 1’’ elbow 46 1”union 47 1” tee 48 1” socket 49 1” plug 50 1” cap plug 51 1” tank nipple 52 1” x 2” nipple 53 1” x 4” nipple 54 1” x 6” nipple 55 1” x 9” nipple 56 1” x 12” nipple 57 1”x ½’’reducer elbow 58 11 / 2’’ elbow 59 11 / 2”union 60 11 / 2” tee 61 11 / 2” socket 62 11 / 2” plug 63 11 / 2” x 2” nipple 64 11 / 2” x 4” nipple 65 11 / 2” x 6” nipple 66 11 / 2” x 9” nipple 67 11 / 2” x 12” nipple