providing and fitting of illumination / electrical system / equipments and allied works in park at bella colony, rajouri.- 1 supplying and drawing following sizes of fr pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 2 1.5mm sq. 3 providing and laying of armoured aluminum cable encased in 3 id ribbed flexible pvc hose pipe to act as conduit for cable of havells, anchor, finolex, polycab or equivalent make in dug out trenches. the job includes digging out trenches and laying of cable including refilling of trenches. 4 10mm sq 2 - core 5 25mm sq 4 - core 6 providing and fitting of 90 w led street light made up of pressure die cast aluminium housing with toughened glass and high power leds and secondary lenses with ip66 protection of crompton and greaves make ( cat ref.: lstp-90- cdl-m ) or bajaj or wipro or philips or halonix orequivalent make and making of all arrangements for proper fitting of light assemblies.complete job includes carriage upto the site, labour and material charges. 7 providing and fitting of ms ornamental feeder panel with ornamental roof of size 3 x 3 x 1 ft. the ornamental panel is to be fabricated out of 16 gauge ms sheet with front door having proper bolting system and fitted with multifunctionalvoltmeter, phase indicating lamps ( 04 nos. ) . the feeder panel should have provision for fitting of 100 amp. main switch, spn & tpn. all the electrical fittings must be fitted or should have a provision of fitting on vertical hinged ms sheet. angle iron extended from four corners of the shed is grouted in cement concrete block in the ratio of 1:4:8 mix. painting two coats steel primer and two coats of synthetic enamel paint from inside and outside of the feeder panel is also included in the job.complete including all material required, labour and carriage charges. 8 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure of bricks with cc bed and cover plate having locking arrangement and watering 40mm dia pipe of 2.7 metre long etc. with charcoal / coke-90kg and salt-50kg. complete job with excavation and refilling of earthing pit. 9 providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i.pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re-filling etc. as required. 10 supplying and laying 6 swg g.i. wire at minimum one ft below ground level for conductor earth electrode, including connection / termination with gi thimble etc. as required. the job includes digging and refilling of trenches. 11 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering up to plinth level 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size ) crushed 12 hand packed stone including cost of stone. 13 carriage of sand average distances 07 kms by mechanical transport. 14 carriage of stone aggregate average distances 07kms by mechanical transport. 15 providing and fitting spn of havells / l&t / wipro / indo kopp or equivalent make. 16 32amp spn. 17 40 amps spn. 18 63amp spn. 19 providing and fitting of g.i pole ( using gi pipe of medium grade ) for light assembly fabricated out of 4” dia g.i pipe for ist 10 ft and 3” dia g.i pipe for next 10ft. over the top of the pole 2 1 / 2 ”dia g.i.pipe 3 ft. long and angled bracket fabricated as per requirement at site and as directed by engineer in-charge is welded for holding of light assembly. painting of the pole with two coats of aluminium paint is also included in the job. complete including cost of material, labour and carriage upto the site of work. ( double bracket pole ) 20 providing and fitting of 100amps main 415v main switch 4 pole ( mccb ) of havells, l&t or ge or equivalent make. complete including incoming and outgoing connections with required nuts, bolts and washers. 21 providing and fitting of 8” x 8” x 4 ms pole connection box including mcb of 10 amp with lid and proper clamping system with locking arrangement includes welding making cable connections.the pole connection box is to be fixed 1.5 mtrs above ground level complete job. 22 providing and fitting of ms bus-bar panel fabricated out of 14 gauge rolled steel with front door having proper bolting system. angle iron extended from four corners of the shed is grouted in cement concrete block. painting two coats steel primer and two coats of synthetic enamel paint from inside and outside of the bus-bar panel is also included in the job.complete including all material required, labour and carriage charges. 23 100 amp bus bar panel 24 earthwork excavation in foundation, trenches or drains not exceeding 1.5 meters in width, including dressing of sides and ramming of bottoms and lift upto 1.5 meters including getting out the excavated soil and disposal of surplus excavated soil as directed. all kinds of soils.