nedc- central office -provision of aluminium partition for ee/o&m/nagapattinam chamber and cub- board providing to rcs,gis,ee/general section at se office nagapattinam.; 1 partition 2 providing partition with anodized aluminium frame using medium gauge aluminium hallow tubular section of size 62 x 35 mm and 95 x 38 mm at bottom fixed with approved quality and 4mm thick cooling glass 4mm thick for top panel and 12 mm thick particle board with lamination (both sides )of approved qualityfor board partition fixing in equal panel (or) as directed by engineer in charge of the work including cost of all materials, labour charges for fabrication and fixing, lead, lift etc., complete. 3 supply and fixing in position of anodisedaluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608kg/m and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 kg/m, door bottom section 83.50 x 44.45 x2.40mm@ 1.679kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 kg /m glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 kg/m, rubber beedings, hinges, handle, door pivot and with 12mm tk. one side laminated board at bottom half portion and top half portion with 4mm thick plain galss glass including cost of all materials, lead, lift, etc, complete single leaf door 1.00 x 2.10 m 4 providing cup-board shutter with frame using termite water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed inthe outside of the shutter using fevicol along with necessary furniture fittings,such as,hydralic hinges,tower bolt,handles,multi purpose locks etc.,as directed by the departmental officers.the design pattern, water proof playwood,laminate sheet and other materials should be got approved from the executive engineer before use on work.