tender for repair work of public property np pratapgarh. - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m 4 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size) 5 random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand) 6 brick work with modular bricks of class designation 75 in foundation and plinth in:cement mortar 1:6 (1 cement : 6 coarse sand). 7 kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :area of each slab 900 to 2000 sqcm 8 p & f 1st quality vitrified porcelain polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1 : 4 including grouting the joints with white cement and matching pigment etc complete.size 600 mm x 600 mm 9 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:4(1 cement : 4 fine/ coarse sand) 10 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 11 wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade: two or more coats on new work 12 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:4(1 cement : 4 fine/ coarse sand) 13 wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade: two or more coats on new work 14 providing and fixing t-iron frames for doors, windows and ventilators of mild steel tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.