releasing 110 kw load use for theme lighting at adhishasi abhiyanta ( kda ) premises no. ganga barrage under eudd-nawabganj div releasing 110 kw load use for theme lighting at adhishasi abhiyanta ( kda ) premises no. ganga barrage under eudd-nawabganj div , loading unloading & carriage of material from store kesco to work site. , 250 kva transformer , st pole 9.5 mtr. & 11 mtr. sp 55 , m.s. top channel , p.g. clamp , stay set complete , barbed wire , 11 kv do fuse set with structure , tpmo switch with clamp , transformer base channel , 11 kv ht xlpe cable 3x70 sqmm , lt xple cable 3.5x150 sqmm , 11 kv out door joint box 3x70 sqmm , acsr weasel conductor , l.t. xlpe cable 1x300 sqmm , m.s. item , outdoor type c.t / p.t. combing pole , 11 kv ht tvm , supply by contrator , stone paid 300x300x75 mm , m.s. clamp , clamp with nut & bolt , danger board with clamp , earthing complete , disc. insulator b & s type , disc. fitting , pin insulator , 11 kv pin , number plate , barbed wire , l.t. circuit , g.i. pipe 6 dia , alu lug 240 sqmm. , suspension clamp with eye hook & holding clamp , dead and clamp with eye hook & mounting clamp , l.t. busing l connection , erection of material , errection of ht double pole structure fitting of all channelsbrackets, insulators and other hardware fittings etc. , errection of single pole structure fitting of all channelsbrackets, insulators and other hardware fittings etc. , grouting of single pole with cement, brick ballast and coarse sand as per standard specification. , making of pole plinth as per standard specification. , painting of single pole one coat with red oxide and 2 coats with isi mark enamel paint. , fixing of stay rod and its errection and grouting by fitting of straight line stay wire and its proper binding and tighting etc. , opening of h.t. jumpher from the existing 3 phase 3 wire h.t. overhead line for errection work , laying of lt & ht xlpe cable all size , making o / d joints of 11 kv xlpe cable , newly network system ( old systom to new systom encrgyes ) , supply of 60 mm. dia classb g.i. pipe 40 long including m.s. flat 50×6mm. along with all related materials required for distribution t / f earthing work. , boring 60 deep & connection of neutral busing with g.i. pipe through m.s. flat / earth wire with proper connection arrangement. , fabrication and ercetion of distribution t / f fencing of frame size 3×2.4 mtr. including cost of m.s. angle size 40×40×5 and m.s. flat size 35×5, fixing of welded steel wire fabric on steel frams by welding of 10 swg wire fabric, including painting of two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including evening of oil & dust. , erection of distribution t / f on plinth / d / pole structure. , opening of ht / lt jumphering. , making of ht / lt jumphering , earthing of rod , 11 kv o / d type c.t. / p.t. combind pole mounted unit ctr 5 / 5 to 200 / 5a , 11 kv h.t.t.v.m. with lpr with plinth / earthing / complete work