e-tender for the supply of furniture and other related works at calicut e-tender for the supply of furniture and other related works at calicut-2 sofa single seater and double seaterproviding and fabricatingsofa setusinginside 9 mm, plywood with treated wood , seating area above 40 density rebounded foam and 32 density sofat foam, other area 23 densityhd foam and art leather or cloth 3 center table for sofa seater fabrication, supply & installation table with squre as per the drawing.15mm mdf with 0.8 mm laminate ( greenlam or equivalent ) finish on both side. approved material and 550 mm hight from floor with necessary vertical support of ms leg frames with epoxy powder coating with necessary plinth screw bushes at the base.including cost and conveyance of all materials labour charges etc size 750x750 mm 4 discussion table : fabrication, supply & installation table as per drawing using 15mmmdf with 0.8mm laminate ( greenlam or equivalent ) finish on both side. approvedmaterial and 750 mm hight from floor with necessary vertical support of ms leg frameswith epoxy powder coating with necessary plinth screw bushes at the base. includingcost and conveyance of all materials labour charges etc size 1000x650 mm 5 puffy chair: fabrication, supply & installation of puffy chair using 9 mm plywood with treated wood inside , seating area using 40 kg / cum density rebounded foam and 32 kg / cum density sofat foam, other area 23 kg / cum density hd foam 6 discussion chair : fabrication, supply & installation of discussion chairs with hardwoodwood and without arm 7 linear work station tables: fabrication, supply & installation of work station with eachindividual unit as per the drawing using 15mm mdf with 0.8mm laminate ( greenlam orequivalent ) finish on both side. necessary wire management with approved material andfront separation above the table top, at 750mm high from floor with necessary verticalsupport of ms leg frames with epoxy powder coating with necessary plinth screwbushes at the base. 300mm ht partition screen on table top with holder at the base.including cost and conveyance of all materials labour charges etc size 1200x600 mm 8 workstation chairs : mid back with armrest, multiple locking system, seat upholsteredwith pu foam & back with mesh. gas lift for seat and height adjustment, nylon base 9 pedestal storage : fabrication, supply and installation of side storage as per the size 189403 using 15mm mdf with 0.8mm laminated ( greenlam or equivalent ) finish. alledges are lipped with 2mm and 0.8mm pvc edge band. bottom shall be provided withcastor for mobility. hardware: ebco. all pieces will be joined using boring.500x450x640 mm ( beneath table ) .including cost and conveyance of all materials labourcharges etc 10 conference table conference room table : fabrication, supply & installation work station with each individual unit as per the drawing. 15mm mdf with 0.8mm laminate ( greenlam or equivalent ) finish on both side. necessary wire management withapproved material. at 750mm high from floor with necessary vertical support of ms legframes with epoxy powder coating with necessary plinth screw bushes at the base.including cost and conveyance of all materials labour charges etc size 2400x1150x740mm