tender for interior furnishing to waqf board office building at kozhikode- 1 ground floor - cabin 2 od76352/2025-2026 supplying and fixing office table. the size of the table is 210x75x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the table top shall be finished with corian tape and front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock, handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided.one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 3 od76357/2025-2026 providing and fixing fully glazed partition with 12mm thick toughened glass with etching pattern as per the drawing. the frame works are of aluminum section at top and bottom which is covered with 6mm is 303 bwr plywood finished with 1mm thick laminate of approved color and pattern. a door also included. necessary pivot, dorma etc make floor springs, pair of stainless steel brush finished handle to shutter , glass door lock of approved make etc to be fixed to the door. the edges of the glass to be polished. 4 od76363/2025-2026providing & fixing full height partly glazed partitions, the frame works are using aluminum rectangular sections size of 63.5 mm x 38.1mm aluminum frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft center to center. for the bottom 3 feet height panel and the top panel above 70 up to false ceiling level and on both sides to be covered with 6mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, toughened glass of 8mm thickness to be fixed as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary. similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc. door to be done in same manner. size: 30x70 with locks, handle, door closure & stopper. 5 od76374/2025-2026providing file storage with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood finished with 1 mm thick laminate of approved color. the front portion of the cupboard is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. 6 od76381/2025-2026providing and fixing wpc louver wall paneling . frame work to be finished using 19mm plywood grade (is710) to be fixed over exposed area finished with 19mm wpc louver panels fixing with steel clamp as shown in the drawing 7 od76384/2025-2026 providing and fixing ledges on wall made of plywood and width of 25 cm with 19mm bwr grade (is710) marine ply wood using 1mm thick laminate wooden shade. edges are protected with 2 mm pvc edge band. 8 od76386/2025-2026 providing & placing visitors chair with nylon base: 330mmsynchronized multifunction mechanism, electro plated tuv-class4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labor charges etc 9 od76390/2025-2026providing & placing high back revolving chair with upholstered with leatherette seat and simple single lock mechanism . armrest: precision molded & electro plated d armrest, gas lift: electro plated tuv- class 4 gas spring 120mm, base: star designed polished aluminum base, castors: 50mmpu castors, including conveyance of all materials labor charges etc 10 od76395/2025-2026providing and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 11 od76397/2025-2026providing and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete, including cost and conveyance of all materials labour charges etc. 12 ground floor - office hall 13 od76399/2025-2026providing and laying in position office table. the size of the table is 150x75x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beadings and groves in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm beveled glass top shall be fixed on table top. design as per drawing. 14 od76401/2025-2026 providing and laying office table in position. the size of the table is 150x60x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1mm laminate supported by steel slides is to be provided. a footrest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beadings and groves in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm beveled glass top shall be fixed on table top. design as per drawing. 15 od76427/2025-2026providing and laying office table in position. the size of the table is 127x60x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock, handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beadings and groves in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm beveled glass top shall be fixed on table top. design as per drawing. 16 od76719/2025-2026providing & fixing 120cm height partly glazed partitions using aluminium rectangular sections size of 63.5 mm x 38.1mm aluminium frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft centre to centre or part thereof both ways for supporting frame work and both sides to be covered with 12 mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, fluted glass of 8mm thickness to be fixed on top as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary. similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc. 17 od76435/2025-2026providing file storage with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood finished with 1 mm thick laminate of approved color as per the drawing. the front portion of the cupboard is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. 18 od76711/2025-2026providing file storage with seating bench as per drawing with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. the front portion of the cupboard is to be devided into two parts, one is open shelf and other portion is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. a seating bench with 3” leather cushion is to be provided behind the storage shelf as per drawing. 19 od76713/2025-2026 providing & placing visitors chair with nylon base: 330mm synchronized multifunction mechanism, electro plated tuv-class4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labor charges etc 20 od76715/2025-2026providing & placing mid back revolving chair with upholstered with leatherette seat and simple single lock mechanism. armrest: precision molded & electro plated d armrest, gas lift: electro plated tuvclass 4 gas spring 120mm, base: star designed polished aluminum base, castors: 50mmpu castors, including conveyance of all materials labour charges etc as per the drawing. 21 od76731/2025-2026proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 22 od76768/2025-2026proving and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc. wherever necessary complete, including cost and conveyance of all materials labour charges etc. 23 ground floor-js room 24 od76769/2025-2026providing and laying in position office table. the size of the table is 150x75x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beadings and groves in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm beveled glass top shall be fixed on table top. design as per drawing. 25 od76806/2025-2026 providing & fixing full height partitions using aluminium rectangular sections size of 63.5 mm x 38.1mm aluminium frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft centre to centre or part thereof both ways for supporting frame work. for the bottom 3 feet height panel and the top panel above 70 upto false ceiling level and on both sides to be covered with 6mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, toughened glass of 8mm thickness to be fixed as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary. similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc. door to be done in same manner. size: 30x70 with locks, handle, door closure & stopper. design as per drawing. 26 od77401/2025-2026proving and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc. wherever necessary complete, including cost and conveyance of all materials labour charges etc. 27 od76846/2025-2026proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 28 od77408/2025-2026providing & placing high back revolving chair with upholstered with leatherette seat and simple single lock mechanism . armrest: precision molded & electro plated d armrest, gas lift: electro plated tuv- class 4 gas spring 120mm, base: star designed polished aluminum base, castors: 50mmpu castors, including conveyance of all materials labor charges etc 29 od76883/2025-2026providing & placing visitors chair with nylon base: 330mmsynchronized multifunction mechanism, electro plated tuv-class4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labor charges etc 30 od76904/2025-2026providing file storage with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood finished with 1 mm thick laminate of approved color. the front portion of the cupboard is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. 31 ground floor- prayer room 32 od76914/2025-2026providing seating bench with all horizontal and vertical partitions, front and rear side are made of 18/19 mm thick is 710 bwr plywood finished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges l as per the approved drawing and specification by the engineer in charge 33 od76916/2025-2026providing open shelf with all horizontal and vertical partitions, front and rear side are made of 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges l as per the approved drawing and specification by the engineer in charge 34 od76921/2025-2026 providing & fixing full height partitions using aluminium rectangular sections size of 63.5 mm x 38.1mm aluminium frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft centre to centre or part thereof both ways for supporting frame work. for the bottom 3 feet height panel and the top panel above 70 upto false ceiling level and on both sides to be covered with 6mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, toughened glass of 8mm thickness to be fixed as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary.similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc. door to be done in same manner. size: 30x70 with locks, handle, door closure & stopper. 35 ground floor- entrance 36 od77311/2025-2026supply and providing of mug(15nos), buckets(15nos), towel road (15nos) , soap dish(15nos) , carpets floor mats(5nos) , towel(15nos), ash tray(5nos) , waste bins pvc (15nos), soap and hand wash(15+15nos) , kitchen crockeries(crockery with cutlery for serving 20 peoples) , 10 nos of bedsheet and pillow covers, blankets , toilet and floor cleaning (15+15 nos) accessories etc as per the direction of engineer in charge. 37 od77024/2025-2026 providing & placing reception waiting chair/bench with 3 perforated seats with a leatherette cushion including conveyance of all materials labour charges etc. three perforated seats on a beam, 1.2 mm thickness of the seat metal , the seat radian 17.45 degrees , powder coated steel seat, chrome plated handles and legs, ms beamand leather cushion on seat and back rest. 38 od77026/2025-2026supply and placing center table(tea poy), as per approved drawing. under structure finished using ss/wooden section, and 12 mm glass as table top. including cost and conveyance of all materials labour charges etc. size 155x45 cm 39 od77030/2025-2026 providing and fixing 12 mm thick frameless toughened glass sliding door set with sensor of approved brand and manufacture, including providing necessary fixing arrangement and , all complete as per direction of engineer-in-charge, including conveyance of all materials labour charges etc 40 od77049/2025-2026providing & fixing full height partitions using aluminium rectangular sections size of 63.5 mm x 38.1mm aluminium frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft centre to centre or part thereof both ways for supporting frame work. for the bottom 3 feet height panel and the top panel above 70 upto false ceiling level and on both sides to be covered with 6mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, toughened glass of 8mm thickness to be fixed as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary.similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc. door to be done in same manner. size: 30x70 with locks, handle, door closure & stopper. 41 od77035/2025-2026 proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 42 first floor- board room 43 od77127/2025-2026 providing & placing chairs with nylon base: 330mm synchronized multifunction mechanism, electro plated tuv-class4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labour charges etc. design as per drawing. 44 od77314/2025-2026providing and fixing projector stant with screen 4:3 aspect ration 6x4 dp as direction by engineer in charge 45 od77320/2025-2026 providing cabin unit for placing sound control unit including ledges 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour size of 75x20x25cm) 46 od77328/2025-2026 providing and fixing wall décor painting picture on wall with frame as direction by engineer in charge ( size of 180x90cm) 47 od77132/2025-2026 board room table - the table top and verticals are made of 19 mm thick bwr plywood. the table top shall be finished with corian tape and front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. cable manager is to be provided. necessary beedings and groves in laminate to be provided. all the visible / exposed edges shall be provided with 2 mm thick pvc edge banding tape. table of size 7.50mx1.20m. design as per drawing. 48 od77134/2025-2026proving and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete, including cost and conveyance of all materials labour charges etc. 49 od77139/2025-2026 proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 50 od77155/2025-2026 providing and fixing ledges on wall made of plywood and width of 25 cm with 19mm bwr grade (is710) marine ply wood using 1mm thick laminate wooden shade. edges are protected with 2 mm pvc edge band. 51 od77159/2025-2026 providing and fixing wpc louver wall paneling . frame work to be finished using 19mm plywood grade (is710) to be fixed over exposed area finished with 19mm wpc louver panels fixing with steel clamp as shown in the drawing. 52 od91131/2025-2026providing and fixing wall décor painting picture on wall with frame as direction by engineer in charge (size of 75x80 cm) 53 od91135/2025-2026providing and fixing wall décor painting picture on wall with frame as direction by engineer in charge (45x80cm) 54 od91144/2025-2026 providing and fixing wall décor painting picture on wall with frame as direction by engineer in charge ( size of 135x80cm) 55 first floor- chairmans room 56 od77163/2025-2026finishing walls with textured exterior paint of required shade:new work (two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 57 od77174/2025-2026providing and fixing plywood wall paneling with white paint finish . frame work to be finished using 19mm plywood grade (is710) to be fixed over exposed area finished with 19mm wpc louver panels fixing with steel clamb as shown in the drawing 58 od77223/2025-2026sofa: supplying and placing sofa chairs made out of country wood / marine plywood frame work for seat and high back and 4 legs complete with 19 mm thick plywood base and cushion seat as per design/ drawings details, finished with 15mm thick density (32d) polyurethane form cushion of classic or approved and tapestry, including cost and conveyance of all materials labour charges etc. 1 seater sofa 59 od77224/2025-2026 the size of the table is 240x110x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the table top shall be finished with corian tape and front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a footrest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock, handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beedings and groves in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 60 od77226/2025-2026 providing & placing chairs with nylon base: 330mm synchronized multifunction mechanism, electro plated tuv-class4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labour charges etc. design as per drawing. 61 od77231/2025-2026providing and fixing wall décor painting picture on wall with frame as direction by engineer in charge ( size of 180x90cm) 62 od77236/2025-2026 supply and placing center table(tea poy), as per approved drawing. under structure finished using ss/wooden section, and 12 mm glass as table top. including cost and conveyance of all materials labour charges etc. size 155x45 cm 63 od77237/2025-2026 providing open shelf with all horizontal and vertical partitions, front and rear side are made of 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges l as per the approved drawing and specification by the engineer in charge 64 od77241/2025-2026providing file storage with seating bench as per drawing with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. the front portion of the cupboard is to be devided into two parts, one is open shelf and other portion is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. a seating bench with 3” leather cushion is to be provided behind the storage shelf as per drawing. 65 od77248/2025-2026 proving and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete, including cost and conveyance of all materials labour charges etc. 66 od77251/2025-2026providing and fixing ledges on wall made of plywood and width of 25 cm with 19mm bwr grade (is710) marine ply wood using 1mm thick laminate wooden shade. edges are protected with 2 mm pvc edge band. 67 first floor- lobby 68 od77260/2025-2026 supply and placing artificial plant including cost and conveyance of all materials labour charges etc (size of 3 ft height plants with 2x2 feet pot) 69 od77261/2025-2026 supply and placing center table(tea poy), as per approved drawing. under structure finished using ss/wooden section, and 12 mm glass as table top including cost and conveyance of all materials labour charges etc.size 110x56 cm 70 od77262/2025-2026sofa: supplying and placing sofa chairs made out of country wood / marine plywood frame work for seat and high back and 4 legs complete with 19 mm thick plywood base and cushion seat as per design/ drawings details, finished with 15mm thick density (32d) polyurethane form cushion of classic or approved and tapestry, including cost and conveyance of all materials labour charges etc. 3 seater sofa. design as per drawing. 71 od77269/2025-2026sofa: supplying and placing sofa chairs made out of country wood / marine plywood frame work for seat and high back and 4 legs complete with 19 mm thick plywood base and cushion seat as per design/ drawings details, finished with 15mm thick density (32d) polyurethane form cushion of classic or approved and tapestry, including cost and conveyance of all materials labour charges etc. 2 seater sofa 72 od77274/2025-2026providing open storage with all horizontal and vertical partitions, front and rear side are made of 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges as per the approved drawing and specification by the engineer in charge 73 od77275/2025-2026 proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 74 od91179/2025-2026 supply and placing artificial plant including cost and conveyance of all materials labour charges etc (size of 3ft height plants with 2x2 feet pot) 75 od91182/2025-2026 supply and placing artificial plant including cost and conveyance of all materials labour charges etc (size of 1.50 feet height plants with 8 dia pot) 76 first floor- ceo room 77 od77297/2025-2026supplying and laying a table in position. the size of the table is 180x80x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the table top shall be finished with corian tape and front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beadings and groves in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 78 od77300/2025-2026 supply and providing of mug(15nos), buckets(15nos), towel road (15nos) , soap dish(15nos) , carpets floor mats(5nos) , towel(15nos), ash tray(5nos) , waste bins pvc (15nos), soap and hand wash(15+15nos) , kitchen crockeries(crockery with cutlery for serving 20 peoples) , 10 nos of bedsheet and pillow covers, blankets , toilet and floor cleaning (15+15 nos) accessories etc as per the direction of engineer in charge 79 od77365/2025-2026 providing and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete, including cost and conveyance of all materials labour charges etc. 80 od77371/2025-2026 proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 81 od77378/2025-2026 providing & placing high back revolving chair with upholstered with leatherette seat and simple single lock mechanism . armrest: precision molded & electro plated d armrest, gas lift: electro plated tuv- class 4 gas spring 120mm, base: star designed polished aluminum base, castors: 50mmpu castors, including conveyance of all materials labor charges etc 82 od77383/2025-2026 providing & placing visitors chair with nylon base: 330 mm synchronized multifunction mechanism, electro-plated tuv-class 4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labour charges etc. design as per drawing. 83 od77387/2025-2026providing file storage with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood finished with 1mm thick laminate of approved color. the front portion of the cupboard is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. 84 second floor 85 od77441/2025-2026 providing and fixing 12 mm thick frameless toughened glass sliding door set with sensor of approved brand and manufacture, including providing necessary fixing arrangement and , all complete as per direction of engineer-in-charge, including conveyance of all materials labour charges etc. design as per drawing. 86 od77446/2025-2026 providing & placing wooden executive arm chair for chairman with cushion with teak wood cusion with pu foam & imported fabrics, including conveyance of all materials labour charges etc 87 od77463/2025-2026 providing & placing wooden executive arm chair with cushion with teak wood cushion with pu foam & imported fabrics, including conveyance of all materials labour charges etc. design as per drawing. 88 od77458/2025-2026providing & placing wooden executive visitors arm chair with cushion with teak wood cushion with pu foam & imported fabrics, including conveyance of all materials labour charges etc. design as per drawing. 89 od77465/2025-2026 providing & fixing full height partitions using aluminium rectangular sections size of 63.5 mm x 38.1mm aluminium frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft centre to centre or part thereof both ways for supporting frame work. for the bottom 3 feet height panel and the top panel above 70 upto false ceiling level and on both sides to be covered with 6mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, toughened glass of 8mm thickness to be fixed as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary.similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc. door to be done in same manner. size: 30x70 with locks, handle, door closure & stopper. 90 od77470/2025-2026providing and laying table in position.the size of the table is 245x70x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided.one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm bevelled glass top shall be fixed on table top. design as per drawing 91 od77473/2025-2026providing and laying table in position.the size of the table is 372x60x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock, handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided.one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm bevelled glass top shall be fixed on table top. design as per drawing. 92 od77515/2025-2026the size of the table is 250x60x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock, handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided. one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm bevelled glass top shall be fixed on table top. design as per drawing. 93 od77531/2025-2026 providing 30 cm raised platform using vitrified rustic tile over 18mm marine is 710 bwr plywood with proper adhesives and required support to the floor. 94 od77534/2025-2026providing 45 cm raised platform using using vitrified rustic tile over 18mm marine is 710 bwr plywood with proper adhesives and required support to the floor. design asper drawing. 95 od77540/2025-2026 providing and fixing of witness podium with 18mm laminated pvc foam sheet are used in cnc routering, shade edges are protected with 2mm pvc edge band as per the design provided. 96 od77544/2025-2026providing & fixing 105 cm height partly glazed partitions using aluminium rectangular sections size of 63.5 mm x 38.1mm aluminium frame 1.70 mm thickness for all horizontals & verticals spaced at 2 ft centre to centre or part thereof both ways for supporting frame work and both sides to be covered with 12 mm thick plywood is 710 bwr grade and over that 1mm thick laminate to be pasted, fluted glass of 8mm thickness to be fixed on top as per drawing. necessary holes must be made in the partitions frame sections to run the wires, computer cables wherever necessary.similarly necessary cuttings to be made in the plywood surface to fix switch boxes of electrical, telephone sockets, computer information outlets etc 97 od77550/2025-2026 providing and laying table in position.the size of the table is 210x60x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided.one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm bevelled glass top shall be fixed on table top. design as per drawing. 98 od77551/2025-2026 providing and laying office table.the size of the table is 110x60x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided.one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 8mm bevelled glass top shall be fixed on table top. design as per drawing. 99 od77555/2025-2026 providing table of size 150x70x75cm and laying in position.the size of the table is 150x70x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the table top shall be finished with corian tape and front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. a foot rest with country wood of 7.5x2.5cm also to be provided. the inner portion is painted with 2 coats of enamel paint over a coat of wood primer. drawers are made of 12mm thick bwr plywood and exposed faces are finished with 1 mm laminate and inner sides with enamel paint finish as shown in the drawing. necessary fittings such as steel slides, godrej lock , handles etc. of approved make are to be provided. one drawer set contains three numbers are to be provided.one cable manager is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 100 od77562/2025-2026providing and fixing wall panelling as per drawing. frame work to be finished using 19 mm thick bwr plywood to be fixed over the frame work finish the exterior part of the panelling using 1mm thick laminate as shown in the drawing finish the panelling with necessary projections, grooves, electrical/window openings. design as per drawing. 101 od77569/2025-2026 supply and providing of mug(15nos), buckets(15nos), towel road (15nos) , soap dish(15nos) , carpets floor mats(5nos) , towel(15nos), ash tray(5nos) , waste bins pvc (15nos), soap and hand wash(15+15nos) , kitchen crockeries(crockery with cutlery for serving 20 peoples) , 10 nos of bedsheet and pillow covers, blankets , toilet and floor cleaning (15+15 nos) accessories etc as per the direction of engineer in charge 102 od77580/2025-2026providing and fixing full height thick fabric window curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete, including cost and conveyance of all materials labour charges etc. 103 od77583/2025-2026 providing and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 104 od77587/2025-2026 providing and fixing ledges on wall made of plywood and width of 25 cm with 19mm bwr grade (is710) marine ply wood using 1mm thick laminate wooden shade. edges are protected with 2 mm pvc edge band. 105 third floor 106 od77593/2025-2026 providing and fixing pantry counter with overhead cupboards with 19 mm thick bwr plywood finished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges. 107 od77594/2025-2026 providing and placing of dining table with 19 mm thick bwr plywood fnished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges. mirror size 224x110 cm 108 od77595/2025-2026 providing and fixing of wash basin unit including mirror with 4 mm mirror and 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. necessary pvc edge banding shall be given in all visible/exposed edges. mirror size 224x110 cm 109 od77599/2025-2026providing and laying table in position. the size of the table is 145x45x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 110 od77605/2025-2026 providing and laying table in position. the size of the table is 130x45x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 111 od77611/2025-2026providing and laying table in position. the size of the table is 120x45x75cm. the table top and verticals are made of 19 mm thick bwr plywood. the top, front and side elevation of the table shall be finished with 1 mm thick laminate. a keyboard tray is made of 12mm thick bwr grade plywood finished with 1 mm laminate supported by steel slides is to be provided. necessary beedings and grovees in laminate to be provided. all the visible/exposed edges shall be provided with 2 mm thick pvc edge banding tape. 112 od77618/2025-2026providing and fixing of tv unit including ledges 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour.size of 150x20x25 113 od77622/2025-2026providing and fixing of mirror in toilet with 4 mm mirror (60x45cm) 114 od77626/2025-2026providing and fixing of dress unit including mirror with 4 mm mirror and 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour, with 6mm steel strip as per design. necessary pvc edge banding shall be given in all visible/exposed edges. mirror size 65x110 cm 115 od77630/2025-2026providing and fixing of dress unit including mirror with 4 mm mirror and 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour,with 6mm steel strip as per design. necessary pvc edge banding shall be given in all visible/exposed edges. mirror size 95x110 cm 116 od77769/2025-2026providing and fixing of dress unit including mirror with 4 mm mirror and 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour, with 6mm steel strip as per design. necessary pvc edge banding shall be given in all visible/exposed edges. mirror size 100x110 cm 117 od77778/2025-2026providing and fixing of luggage unit with 18/19 mm thick is 710 bwr plywood finished with 1 mm thick laminate of approved colour, with 6mm steel strip as per design. necessary pvc edge banding shall be given in all visible/exposed edges (size of 75x60x60 cm ) 118 od77797/2025-2026providing wardrobe with all horizontal and vertical partitions, rear side and cupboard doors are made of 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour. the front portion of the cupboard is to be provided with openable shutters using 18/19 mm thick is 710 bwr plywood finished and all the exposed faces are finished with 1 mm laminate and the inner portion is finished with 0.8mm laminate. necessary fittings such as auto closing hinges, magnetic lock, ball catches, 200 mm long ss finish handle etc should be provided in each shutter. necessary pvc edge banding shall be given in all visible/exposed edges. design as per drawing. 119 od77799/2025-2026providing and fixing of headboard panels with 12mm plywood laminated with 1mm mica finish and fabric finish as per drawing. edges are protected with 2mm pvc edgeband. size 235x120 cm 120 od77802/2025-2026providing and fixing of head board panels with 12mm plywood laminated with 1mm mica finish and fabric finish as per drawing. edges are protected with 2mm pvc edgeband. size 280x120 cm. design as per drawing. 121 od77806/2025-2026 providing and fixing of bedset with cot with side table& mattress and pillows by 19mm bwr grade (is 710) marine ply wood using structure and 12mm playwood usedtop of the bed cot. exposed area finished with 1mm thick mica laminate wooden shade including spring mattress and foam pillows. size of cot 198x152cm, side table 45x45cm 122 od77812/2025-2026providing and fixing of bedset with cot with side table & mattress and pillows by 19mm bwr grade (is 710) marine plywood using structure and 12mm playwood used top of the bed cot. exposed area finished with 1mm thick mica laminate wooden shade including spring mattress and foam pillows. size of cot 202x190cm, side table 45x45cm. design as per drawing. 123 od77817/2025-2026sofa: supplying and placing sofa chairs made out of country wood / marine plywood frame work for seat and high back and 4 legs complete with 19 mm thick plywood base and cushion seat as per design/ drawings details, finished with 15mm thick density (32d) polyurethane form cushion of classic or approved and tapestry, including cost and conveyance of all materials labour charges etc. 3 seater sofa. design as per drawing 124 od77820/2025-2026supply and placing center table(tea poy), as per approved drawing. under structure finished using ss/wooden section, and 12 mm glass as table top. including cost andconveyance of all materials labour charges etc. size 110x45 cm. 125 od77830/2025-2026finishing walls with textured exterior paint of required shade:new work (two or more coats applied @3.28 ltr/10sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 126 od77840/2025-2026providing & placing wooden arm chairs with cusion including conveyance of all materials labour charges etc 127 od77841/2025-2026supply and providing of mug(15nos), buckets(15nos), towel road (15nos) , soap dish(15nos) , carpets floor mats(5nos) , towel(15nos), ash tray(5nos) , waste binspvc (15nos), soap and hand wash(15+15nos) , kitchen crockeries(crockery with cutlery for serving 20 peoples) , 10 nos of bedsheet and pillow covers, blankets , toilet and floor cleaning (15+15 nos) accessories etc as per the direction of engineer in charge 128 od77843/2025-2026proving and fixing manual controlled roller curtains/blinds made of premium quality fabric around aluminum tube to be raised and lowered by ball chain pully, to provide adequate privacy and light control. as per architect approved brand & shade. including cost and conveyance of all materials labour charges etc. 129 od77849/2025-2026providing & placing visitors chair with nylon base: 330mm synchronized multifunction mechanism, electro-plated tuv-class4 gas spring : 120 mm, seat upholstered with pu foam & back with mesh and lumbar support & imported fabrics, including conveyance of all materials labour charges etc. design as per drawing. 130 od77858/2025-2026providing and fixing ledges on wall made of plywood and width of 25 cm with 19mm bwr grade (is710) marine ply wood using 1mm thick laminate wooden shade. edges are protected with 2 mm pvc edge band. 131 od77860/2025-2026providing and fixing wpc louver wall paneling . frame work to be finished using 19mm plywood grade (is710) to be fixed over exposed area finished with 19mm wpc louver panels fixing with steel clamp as shown in the drawing 132 od77869/2025-2026proving and fixing full height thick fabric window curtains with sheer curtains including fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc.,wherever necessary complete, including cost and conveyance of all materials labour charges etc. design as per drawing. 133 od91217/2025-2026providing and fixing of tv unit including ledges 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour.panel size of 135x200 with ledges 160x20x8 134 od91218/2025-2026providing and fixing of tv unit including ledges 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour.panel size of 120x180 with ledges 105x15x7.50 & 135x30x7.50 135 od91219/2025-2026providing and fixing of tv unit including ledges 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour.size of 220x20x25 136 od91276/2025-2026 providing and fixing of luggage unit with 18/19 mm thick is 710 bwr plywood fnished with 1 mm thick laminate of approved colour, with 6mm steel strip as per design. necessary pvc edge banding shall be given in all visible/exposed edges (size of 110x60x60 ) 137 od91277/2025-2026providing and fixing of luggage unit with 18/19 mm thick is 710 bwr plywood finished with 1 mm thick laminate of approved colour, with 6mm steel strip as per design. necessary pvc edge banding shall be given in all visible/exposed edges (size of 100x60x60) 138 9.84providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.