tender for civil work at ayurved aushdhalya (aam) kishanpura dikhnada - removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only) 3 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :with cement mortar 1 :4 (1 cement : 4 coarse sand) 4 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:old work (one or more coats ) 5 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision.old work 6 painting with synthetic enamel paint of approved brand and manufacture togive an even shade :one or more coats on old work. 7 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,)20mm nominal size 8 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 9 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to is:1786)thermo-mechanically treated bars (conforming of relevent is code) 10 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes type b for sciland waste discharge system (is:13592 : 1992 marked) of approved quality /make 110mm dia 11 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes fittings type b for sciland waste discharge system (is:13592 : 1992 marked) of approved quality /make.door bend 87.5 dg.110mm dia 12 p & f 15 mm. dia connection pipe of approved quality/make :pvc pipe withc.p. brass nuts upto length, 450mm. 13 p & f grating of approved quality/make:stainless steel sheet size 125mm dia. 14 providing & fixing c.p.flange for 15mm dia taps. 15 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15 mm brass (is:8931 marked). with 60 cm long thread and nut. 16 p & f bib cock (is : 8931 mark), superior quality of approved make:c.p. brass bib cock, long body, 15mm nominal bore weight not less than 690 gm 17 providing and fixing 1st quality mat finished ceramic tile sie 300x300m confirming to is:13755 and is:15622 color such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floor, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 18 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor arches, arch ribs, domes, vaults, shells, folded plate, chimneys, shafts , roofs having slope more than 15º ,vertical and horizontal fins individually or forming box louvers, facias and eaves boards m20 grade nominal mix / design mix 19 p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor :wvc lab sink (is:2556 mark) size 530 x 430 x 180 mm 20 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] 21 p & f gun-metal non-return valve or check valve (is : 778 make) of approved make, superior quality:20mm nominal bore. (a) horizotal 22 half brick masonry in superstructure , above plinth level upto floor vlevelusing bricks of designation 75 cement mortar 1 : 4 (1 cement : 4 coarse sand) 23 plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish :12mm thick . 24 labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 25 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.rajasthan black1501 cm2 to 3600 cm2 tiles 26 p & f pvc storage tank (is:12701 marked indicating the bis license no.) of approved make with cover, 25 mm dia 1 m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including placing on terrace (at all floors), making connection etc. complete of approved design. 27 providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of w.c., kitchen and the like consisting of:(i) ist course of applying cement slurry @ 4.4 kg/sum mixed with water proofing compound conforming to is 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.iind course of 20mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water. proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface..iiird course of applying blown or residual bitumen applied hot at 1.7 kg per sqm. of area.ivth course of 400 micron thick pvc sheet .(overlaps at joints of pvc sheet should be 100 mm wide and pasted to each other with bitumen@ 1.7 kg/sqm.)