civil work at ayurved aushdhalya (aam) mirzawali mer - civil work at ayurved aushdhalay (aam) mirzawali mer 2 brick work with f.p.s. bricks of class designation 75 in superstructure above plinth level upto floor v level in all shapes and sizes in :cement mortar 1 : 6 (1 cement : 6 coarse sand) 3 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 4 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix 5 p & f pvc storage tank isi marked (is : 12701) indicating thebis license no),of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litr 6 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 7 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick . 8 grading roof for water proofing treatment withwater proffing compound .cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 9 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1 :4 ( 1 cement : 4 coarse sand) 10 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to is:1786).thermo-mechanically treated bars (conforming of relevent is code) 11 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:.two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.old work (one or more coats ) 12 p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor fire clay glazed kitchen sink (i.s 771-1985marked) size 600 x 450 x 250mm. 13 p & f low level flushing cistern of 10 litres capacity (is : 2556 mark) of approved make with complete fittings c.i. brackets duly painted, brass ball cock with ball (is: 1703 mark) complete including cutting and making good the wall:wvc with c.p. brass bend 14 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mm c.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make, p.v.c waste pipe with pvc nut 32 mm complete including cutting & making good the wall :size 630 mm x 500 mm dia for counter top 15 p & f bib cock (is : 8931 mark), superior quality of approved make:c.p. brass bib cock,15mm nominal bore. 16 p & f g.i. pipes (internal work) with g.i. fittings excluding union (is:1239 mark) & ms clamps including cutting and making good the walls and floors:20mm dia nominal boreb class 17 providing and fixingsuperior quality cp brassfittings of approved make as per direction of engineer-in-charge c.p. brasslong body bib cock 15 mm nominal size 18 p & f pilllar cocks (is :8931 : 1993 mark) of superior quality and approved make:c.p. pillar cock, swan-neck with casted spout, 15mm nominal bore. 19 p&f rigid pvc pipe (is:4985 mark) class ii (4 kg /cm2) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 20 p & f grating of approved quality/make:stainless steel sheet size 125mm dia. 21 p & f looking mirrors with p.v.c. frame of approved make as per direction of engineer-in-charge size 500x400mm 22 p & f european type white glazed vitreous china 1st quality w.c pan (is : 2556 mark) with p or s trap including cutting and making good the wall and floor 23 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 24 providing and fixing 1st quality mat finished ceramic tile sie 300x300m confirming to is:13755 and is:15622 color such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floor, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 25 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : one or more coats on old work. 26 p&f rigid pvc pipe (is:4985 mark) class ii (4 kg /cm2) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 27 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. (internal work exposed on wall) 20mm nominal outer dia pipes 28 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. (internal work exposed on wall) 32mm nominal outer dia pipes