tender for civil maintenance work in houses number-12, 12a, 14, 15, 16 and 04a, 5a situated at kalidas marg, 1 providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 20 mm nominal bore ) 18.46.2 2 providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3 3 providing and fixing c.p.brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a) 4 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. stainless steel a lsl-304(18/8) wash basin size-530x345 mm with single 15 mm c.p. brass pillar tap. (17.7.11) 5 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. semi rigid pipe 32mmdia (17.28.1.1). 6 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. flexible pipe 32mm dia(17.28.2.1). 7 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (17.31). 8 providing and fixing 600x120x5 mm glass self with edge round off, supported on anodiesd aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.(17.33). 9 providing and fixing toilet paper holderc.p. brass (17.34.1). 10 providing and fixing water closet squatting pan (indian type w.c. pan)with 100 mm sand cast iron p or s trep, 10 liter low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is :7231 with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required white vitreous china orissa pang size 580x440 mm with integral type foot rests. dsr-17.1.1, 11 providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work, including cutting chases and making good the walls etc. (15mm nominal dia pipe )18.8.1, 12 providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal dia pipe )18.8.2, 13 providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal dia pipe )18.8.3, 14 providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work. including cutting chases and making good the walls etc. (32mm nominal dia pipe )18.8.4, 15 providing and fixing g.i. pipe complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. inernal work - exposed on wall ( 15 mm nominal bore ) 18.10.1 16 providing and fixing g.i. pipe complete with g.i. fittings and clamps, i/c cutting and making good the walls etc etc inernal work - exposed on wall. ( 20 mm nominal bore ) 18.10.2 , 17 providing and fixing g.i. pipe complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. inernal work - exposed on wall. ( 25 mm nominal bore ) 18.10.3, 18 providing and fixing g.i. pipe complete with g.i. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( 15 mm nominal bore ) 18.11.1 19 providing and fixing g.i. pipe complete with g.i. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( 20 mm nominal bore ) 18.11.2 20 providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete:( 15 mm nominal bore) 18.18.1 21 providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2 22 providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3 23 providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1 24 providing and fixing c.p.brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1) 25 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1)