renovation with supply installation testing and commissioning of pump set, overhauling of motor control panel and its allied work at rural water supply scheme, chirkunda-kumardhubi, maithan ( old scheme ) , raw water pumping plant:- , cost towards supplying, installation, testing and commissioning of electrically drivenhorizontal split casing centrifugalpump set make ( kirloskar / wpil / mather & plate / jyoti ) coupled with tefc sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with suitable size of cidf sluice valve-1 no, cidf nr valve-1 no, foot valve-1 no, pressure gauge-1 no, tyre coupling-1 no etc all complete.head-50 mdischarge-275 m3 / h ( hp-100 approx ) , supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundationfor installation of new hsc centrifugal pump sets. , supplying all labour tools and tackles for making new pcc foundtiaon of size 6 x 3 x 3 with all materials such as cement , sand, stone chips, foundation bolt-6nos etc all complete and plastering and punning over exposed surface with all labour, tools, tackle and technician charges. , cost towards supply and laying of suction pipe line with s / f of 10 dia g.i. pipe 2 meter, 10 dia g.i. bend-1 no., 10dia g.i. flange-4nos., rubber insertion-10kg, nut, bolt & washer-10kg etc and cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) , cost towards supply and laying of 8dia delivery line with s / f of8 dia heavy duty g.i. pipe 1 meter, 8dia g.i. flange-4nos., rubber insertion-10kg, nut, bolt & washer-10kg etc and cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) , cost towards overhauling of motor control panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults with supply and fitting of damaged spares such as bus bar-1set, ampere meter-1no., voltmeter-1no., indicating lamps-3 no. etc, dressingof motor cables with new lugs, crimping works etc all complete and testing on full load. ( rate after deducting the cost of scrap materials ) . , cost towards overhauling of f.a.s.d. starter panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults with supply and fitting of contacter set ( ml-4-1no and ml-6-1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay-1no., timer-1no., spp-1no. etc all complete work, dressingand doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . , cost towards supplying and fitting of 30w led flood light, with bracket, copper wire, on-off switch etc with all accessories including all labour tools , tackles and technician charges., with cp & ohc, ( rate after deducting the scrap materials. ) . make-havells / syska / mescab / polycab / phillips , providing chipping work on the roof surface of raw water pump house, removing of all garbage to outside with lead of 50 m , providing and cleaning of concrete surface to remove dust and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. on identification of seepage, cement grouting to be done with non shrink expanding admixture of sika lndia pvt.ltd. / myk schomberg / dr fixit / fosroc or equivalent. [ size-12.5 m x 6.7 m = 83.75 m2 ] , cost towards providing pcc m-200 in nominal mix of 1:1.5:3on roof with approved quality of stone chips 12mm to 6mm size graded andclean course sand of fm 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of e / i. [ jsor bcd 2018-5.3.2.1 ] [ size-12.5 m x 6.7 m x 0.05 m= 4.19 m3 ] , providing 12 mm thick water proof cement plaster ( 1:3 ) with clean coarse sand of f m. 1.5 with integral water proofing compound liquid @125 ml per bag cement including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i.brand-fosroc-conplast x421 lc, sika-plastocrate plus, dr fixit pidiproof lw+, myk proof wp 10 or equivalent. [ size-12.5 m x 6.7 m = 83.75 m2 ] , dismantling old plaster and pointing in cement or lime and taking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of e / i. inside and outside of pump house, approx=310 m2 , providing 6mm thick cement plaster ( 1:4 ) in ceiling and wall of building with clean coarse sand of f.m. 15 including screening, curingwith all leads and liftsof water, scaffoldingtaxes and royalty all complete as per buildingspecification and direction of e / i. , providing two coats ofsnowcemofapproved shade and make overold surfaceincluding washing cleaning and preparing the walls , scaffolding, curing and taxes all completeas per building specification and direction of e / i. , providing 2 ( two ) coats of synthetic enamel paint of approved shade & make oversteel surface including cleaning the surface, removing dirt, scales, smokes, grease, scaffolding & taxes all complete as per building specification and direction of e / i. for door, window, common header pipe, valves etc. approx 30m2 , clear water pumping plant:- , cost towards supplying and fitting of complete rotating assembly for 50hp centrifugal pump, having head-65m discharge-113.5 m3 / hr make-kirloskar with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener-2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) , cost towards supplying and fitting of complete rotating assembly for 50hp centrifugal pump, having head-70 m discharge-114 m3 / hr make-wpil with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener-2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) , cost towards supplying and fitting of complete rotating assembly for 60hp centrifugal pump, having head-70 m discharge-160 m3 / hr make-mather & platt with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener-2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) , cost towards supply and fitting of 4dia coupling set for 50hp pump set with nut bolt etc all complete. , cost towards supply and fitting of 4diacoupling set for 60hp pump set with nut bolt etc all complete. , supplying, fitting, installation, erecting and commissionning ofapproved make h.t. outdoor type gang operated air break triple pole switch, suitable for 11kv line, rotating type, with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps including cp, ohc, transportation, labour charges etc. ( rate after deducting the scrap materials. ) , cost towards supplying and fitting of 250a mccb, 3phase, 50hz, isi marked, with all labour tools , tackles and technician charges. with cp & ohc, ( rate after deducting the scrap materials. ) . make- l&t / abb / hpl / cg , cost towards supplying and fitting of 160a mccb, 3phase, 50hz, isi marked, with all labour tools , tackles and technician charges. with cp & ohc, ( rate after deducting the scrap materials. ) . make- l&t / abb / hpl / cg , cost towards overhauling of motor control panel cum 3 nos. of f.a.s.d. starter panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults of 3nos. f.a.s.d. starter with supply and fitting of contacter set ( mnx95-1no and mnx50-1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay-1no., timer-1no., spp-1no. etc all complete work eachfor 3 nos. fasd starter, dressingand doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . for mcp no.-1. , cost towards overhauling of motor control panel cum 2 nos. of f.a.s.d. starter panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults of 2nos. f.a.s.d. starter with supply and fitting of contacter set ( mnx70-1no and mnx50-1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay-1no., timer-1no., spp-1no. etc all complete work each for 2 nos. fasd starter, dressingand doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . for mcp no.-2. , cost towards supplying and fitting of 30w led flood light, with bracket, copper wire, on-off switch etc with all accessories including all labour tools , tackles and technician charges., with cp & ohc, ( rate after deducting the scrap materials. ) . make-havells / syska / mescab / polycab / phillips , providing chipping work on the roof surface of clear water pump house, removing of all garbage to outside with lead of 50 m , providing and cleaning of concrete surface to remove dust and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. on identification of seepage, cement grouting to be done with non shrink expanding admixture of sika lndia pvt.ltd. / myk schomberg / dr fixit / fosroc or equivalent. , cost towards providing pcc m-200 in nominal mix of 1:1.5:3on roof with approved quality of stone chips 12mm to 6mm size graded andclean course sand of fm 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of e / i. , providing 12 mm thick water proof cement plaster ( 1:3 ) with clean coarse sand of f m. 1.5 with integral water proofing compound liquid @125 ml per bag cement including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i.brand-fosroc-conplast x421 lc, sika-plastocrate plus, dr fixit pidiproof lw+, myk proof wp 10 or equivalent , dismantling old plaster and pointing in cement or lime and taking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of e / i.inside and outside of pump house, , providing 6mm thick cement plaster ( 1:4 ) in ceiling and wall of building with clean coarse sand of f.m. 15 including screening, curingwith all leads and liftsof water, scaffoldingtaxes and royalty all complete as per buildingspecification and direction of e / i. , providing two coats ofsnowcemofapproved shade and make overold surfaceincluding washing cleaning and preparing the walls , scaffolding, curing and taxes all completeas per building specification and direction of e / i. , providing 2 ( two ) coats of synthetic enamel paint of approved shade & make oversteel surface including cleaning the surface, removing dirt, scales, smokes, grease, scaffolding & taxes all complete as per building specification and direction of e / i. for door, window, common header pipe, valves etc.