BRR : 9009016
Tender Brief : Request For Proposal For Rate Of Gas Cremation Furnace , Cremator Furnace Shell Consisting Of Combustion Chamber Dully Lined With Refractory Bricks Of High Alumina Contain Of Over 40% Al203 And Backed By Insulating Bricks, With Back Back Up Insulation Of 25 Mm Thick Ceramic Wool Provided Inside Outer Cover Panels And Operator View Glass And Body Holding At 900 Mm Height From To Ground Level. Heavy Duty Rolled M.S Section And Good Quality Fabrication With Hearth Provided With Refractor Cast Slab. Welding Done Up Side Down To Prevent Leakages And 225 Mm Size Taper Refractory Bricks Are Used T... Read More
Tender Value
₹
Ref. Document
Submission Date
12-05-2021
Participated Bidder List
4 No of Bidder(s)
| Sr No. | Bidder Name | Bid Analytics | Technical Bid | Financial Bid | AOC | Bid Value | Rank |
|---|---|---|---|---|---|---|---|
| 1 | cnet-technologies | Bid Analytics | |||||
| 2 | cnet-technologies | Bid Analytics | |||||
| 3 | cnet-technologies | Bid Analytics | |||||
| 4 | cnet-technologies | Bid Analytics |
Work Detail
request for proposal for rate of gas cremation furnace , cremator furnace shell consisting of combustion chamber dully lined with refractory bricks of high alumina contain of over 40% al203 and backed by insulating bricks, with back back up insulation of 25 mm thick ceramic wool provided inside outer cover panels and operator view glass and body holding at 900 mm height from to ground level. heavy duty rolled m.s section and good quality fabrication with hearth provided with refractor cast slab. welding done up side down to prevent leakages and 225 mm size taper refractory bricks are used to provide the crown or arch weighing about 8.5 tons. , main gas burner with auxiliary burner complete with refractory burner blocks, atomizing arrangement with oil and air lines duly connected. , blowers with air lining flange are blowers are fitted 3 hp electric motors and are of 300 cfm capacity with over load relays and contractors and separate switches and fuses. , gas reticulation for supplying the lp gas to the cremator from the gas cylinders storage shed with pig tails, regulators for 48 cylinders, valves seamless pipe, pressure gauges, change over valve, solenoid valves, shut off valves etc. , door assembly lined like the main furnace body of the cremator, supported on 3nos plummer blocks, with counter weight type arrangement and chain pulley blocks for easy operation. door weight 0.5 tones. , body loading mechanism with 10guage high carbon steel metal mesh belt with sprocket and chain arrangement with a geared reduction motor and separate traveling crain type cable suspended from above for ease in operation. , electric control panel with 3 nos of pilot lamps, 12 nos of fuses, 100 amps bus bar, and one numbers of temperature indicator of digital dancing type characters with contractors and relays for each motors. separately in m.s fabricatedunit. , 30 meter tall self supported m.s chimney , s.s 304 water scrubber, necessary ducting up in to the chimney. 6000 litres capacity water tank with pumps and plumbing , 7.5 kvs 3 phase generator duly coupled with alternator, mechanical change over, diesel engine with 4 nos of anti vibratory mounts , dry chemical powder ( dcp ) 7.5 kgs capacity 2 nos and carbondi oxide ( co2 ) 2 nos. of fire extinguishers along with 2 nos of sand buckets
View Original Notice/Document
Result Documents
Tender Documents
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender
Technical Evaluation In Progress
Technical bid evaluation is currently in progress. Awarded bidder details will be available after completion of technical scrutiny.
TechnicalBid
Similar Tenders Results