tender for rejuvenation of existing tube well during canal closure under pdr division ii bikaner - supply & installation of 3 phase isi marked submersible motor pump set ofthree star or better rating of beeand as per is: 8034-2018 ( pump ) and is 9283-2013 ( motor ) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well / dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 3 11 kw ( 15 hp ) & head above 120 mtr. 4 13 kw ( 17.5 hp ) & head up to 120 mtr. 5 13 kw ( 17.5 hp ) & head above 120 mtr. 6 15 kw ( 20 hp ) and above, head up to 120 mtr. 7 15 kw ( 20 hp ) and above, head above 120 mtr. 8 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom ) .all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be ofminimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm ) duly bolted / screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system.the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply. above 15 hp and up to 20 hp 9 supply & fixing of isi marked three core pvc flat submersible cableas per is 694:1990 or amended up to date and conductor as per class 5 of is 8130:1980including making connection etc. 3 core 10.0 sq.mm 10 providing & lowering in tube well isi marked gi pipe medium duty ( “b class ) , steel tube as per is:1239 or amended up to date and zinc coating as per is 4736, threaded and double flanged ( welded ) on both ends and two number25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 11 supply and fixing of oil / air breakdol / star deltastartermade out of sheet steelpowder coated enclosure withsingle phasing protection, on / offpush buttons, etc. complete in all respect suitable for following rating motors. 30.0 hp to 35.0 hp