tender for rate contract for supply and installation of 3 phase submersible motor pump set, suplly and fixing pvc submersible cable, providing and lowering gi pipe, supply and fixing electric control panel during the financial year 2026-27 , supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 15 kw (20 hp) and above, head above 120 mtr. , supply & fixing of isi marked three core pvc flat submersible cable as per is 694:1990 or amended up to date and conductor as per class 5 of is 8130:1980 including making connection etc. 3 core 10.0 sq.mm , providing & lowering in tube well isi marked gi pipe medium duty (b class), steel tube as per is:1239 or amended up to date and zinc coating as per is 4736, threaded and double flanged (welded) on both ends and two number 25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 65 mm dia , supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each legs length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cement concrete platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply. above 20 hp and up to 30 hp