tender for repair to ms cattle trap, culverts, boundary wall, interlocking sign boards & connected work in right frank line alc, carriappa, stavely road, old telephone line & connected area under age b/r-ii of ge (s) pune.; 1 demolition of brick work or stone work / pcc block masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. 2 m&l for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, rough finished surface of concrete, complete all as specified and directed. 3 m&l for rcc (design mix) m-25 using 20 mm graded stone aggregate as in foundation including rafts, footing foundation beams, base for column and mass concrete etc. , complete all as specified and directed. 4 excavation in over areas, n.exc. 1.50m deep and getting out in any type of soil, complete all as specified and directed. 5 excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in any type of soil, complete all as specified and directed. 6 m&l for form work to side of pillars, post, struts & columns etc., finished the surfaces fair, complete all as specified and directed. 7 m&l for rcc (design mix) m-25 using 20 mm graded stone aggregate as in column, pillar, post or struts etc. , complete all as specified and directed. 8 demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above gl), complete all as specified and directed. 9 dismantling of stone slab & tiles of any description or thickness infloor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. 10 returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed. 11 removing excavated materials (soil) exceeding 50m but n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed. 12 demolition of reinforced cement concrete of any description & in any position complete all as specified and directed. 13 m&l pcc 1:3:6 type c-2 (using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth with out using extra cement, complete all as specified and directed. 14 m&l for filling of joints between two panels up to full depth with bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, complete all as specified and directed. 15 taking down old unserviceable sign board and s&f new retro reflective sign board of size 4x3 feet, fixed both sides on stainless steel board made out of aluminium composite panel (acp) sheet, 3mm thick, fixed on ss-304 series hollow tubular section, 38mm dia. the board shall be provided with reflective tape of quality high intensity chequered type blue colour, letter / symbol shall be written in white colour writing of approved shape. the sign board shall be supported on 2 nos. post of 60mm dia stainless steel pipe, 304 series, 3.0m long with round moulded design on top duly embedded in ground of size 450x450x600mm in pcc 1:2:4 type b-2 (using 40mm graded stone aggregate) including necessary excavation & earthwork etc. complete all as directed by engineer-in-charge.note: the sample of sign board is to be approved by engr-in-charge as per ground requirement before procurement by contractor. 16 m&l for pcc 1:4:8 type d-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed. 17 m&l for brick work with fly ash bricks straight or curved on plan exc. 6.0 m mean radius with modular bricks in cm 1:6 complete all as specified and directed. 18 m&l for stone masonary work, size and shape as locally available, straight or curved on plan exc. 6.0 m mean radius in cement mortar 1:6 complete all as specified and directed. 19 m & l for 15mm thick rendering in cement mortar 1:6 on stone / brick / concrete external wall surfaces, finish the surfaces even and smooth with out using extra cement complete all as specified and as directed. 20 s&f 110 mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wallor laid under floors or in trenches,complete all as specified and directed. 21 m&l for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m-35 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using pu mould of required colour & pattern laid over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by engr-in-charge. 22 m&l for pcc (1:2:4) type b-1 using 20 mm stone graded aggregate as inkerbs, bed block or coping including weathering and throating including necessary form work etc. complete all as specified and directed 23 m&l for providing precast reinforced cement concrete 1:2:4 type b-1 as in manhole cover slab and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in cement mortar 1:4, complete all as specified & directed. 24 m&l for precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 using pcc 1:3:6 type c-1 precast cement concrete blocks, c-4 grade, complete all as specified and directed. 25 m&l for form work to soffit and sides of floor / roof beams, bend & lintel, rough finished flat surfaces, complete all as specified and directed. 26 m&l for rcc (design mix) m-25 using 20 mm graded stone aggregate as in beams / lintel over 1.50m span, complete all as specified and directed. 27 s&f in repairs 50mm bore gi pipe medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed. 28 m&l for broken glass coping on top of walls, built in cement mortar 1:3, complete all as specified and directed. 29 m&l for forming square grooves in plaster n. exc. 12mm deep and n. exc. 15mm on facecomplete all as specified and directed. 30 m&l for providing precast reinforced cement concrete 1:2:4 type b-0 (using 12.5mm graded aggregate, set in cm 1:4 as in louvers & jallies, 25mm thick (measured solid) incliding mouldings but excluding frames, complete all as specified and directed. 31 m&l for precast coloured, chequrred cement concrete tiles, glossy finish of size 300 x 300mm x 18-28mm thick, conforming to is-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screedbed in cm (1:6) including demolition of existing floor tiles & bedding layer complete all as specified and directed 32 m&l for 25mm thick pre-formed filler board, complete all as specified and directed. 33 s&f of speed berms made of heavy duty tough rubber of size 350x250x53mm size and weight 1.20 kg (approx) colour shall be black and yellow, complete all as directed directed by engr-in-charge. 34 m&l for preparation of newly plastered surfaces and applying two coats of weather proof exterior acrylic emulsion paint (1st quality) of required shade (company depot tinted) with silicon additives over and including priming coat of exterior primer on surfaces of walls, facia of columns, boarder etc, complete all as directed by engr-in-charge.note:- exterior acrylic emulsion paint shall be of antifungal, dust resistant, water replant, crack-bridging, weather proof type 1st quality. 35 dismantling posts & struts (steel or rcc), embeded in concrete,any section, including taking out embedded portion and making good disturbed ground,complete all as specified and directed. 36 dismantaling fencing wire mesh, anytype,complete all as specified and directed. 37 supply only chain link ms galvanized fencing of any size & shape complete all as specified and directed 38 fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts including provision of binding wire etc. complete all as specified and directed 39 supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to fe 290 gde e-165,complete all as specified and directed. 40 m&l for tmt bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including ms wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 41 s & f for tmt bars 6 to 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia,complete all as specified and directed. 42 s&f in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), including taking down of old unserviceable barbed wire of any type complete all as specified and directed. 43 s&f framed work such as in grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; including ornamental and intricate design, walk ways; railings; framework of water tanks and similar work conforming to fe.290. gde-e-165, including dismantling of old existing steel / iron articles etc. complete all as specified and directed 44 m&l for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, includingpreparation of new steel surfaces, complete all as specified and directed.