tender for provision of store for trg area for 707 tsu under ge(i) gos. - surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. excavation in trenches/over areas upto 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. excavation in trenches/over areas exc 1.5m and n.exc 3.00 m deep and getting out in soft/ loose soil complete all as specified and directed. removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. material & labour for hardcore of broken stone gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. material & labour for cement concrete (1:4:8) type d-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. 8 use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , complete all as specified and directed. 9 use and waste of form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete, complete all as specified and directed. 10 m&l form work to sides and soffits of beams lintels etc finished rough , complete all as specified and directed. 11 formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete. 12 m&lfor form work to the edge of concrete flat n. exc 200 mm thick , complete all as specified and directed. 13 supply & fix mild steel tmt bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 14 supply & fix mild steel tmt bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups , complete all as specified and directed. 15 m&l rcc m-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete 16 m & l rcc m-25 design mix as in columns, pillars, struts, posts etc complete all as specified & directed. 17 m & l rcc m-25 design mix as in beams, lintels over 1.5 m span etc , complete all as specified and directed. 18 m&l for rcc m 25 for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc , complete all as specified and directed. material & labour brick work with fly ash bricks in cm 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified. material & labour for 15 mm thick rendering in cm 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in cm(1:4) surface finished even and smooth without using extra cement but using water proofing compound @3% by weight of cement complete all as specified and directed. material & labour for 5 mm thick plaster in cm 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. m&l for pcc 1:2:4 type b-1 (using 20mm graded stone agg) 25 mm thick for sub base flooring , complete all as specified and directed. m&l cement concrete type d-2 1:4:8 using (40 mm graded crushed stone agg) 100mm thick as in flooring sub base finished even and fair complete all as specified and directed. m&l machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto granite finish complete over 15mm thick screed bed in cm 1:6 , complete all as specified and directed. all as per item no 25 above but factory made bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 , complete all as specified and directed.