supply of valve butterfly triple offset for p25 project at iocl panipat refinery , supply of valve butterfly triple offset , strainer y-type,cs, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, mesh size40 mesh, a105n, internals ss304, etsp wd ss316+grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,cs, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, mesh size40 mesh, a105n, internals ss304, etsp wd ss316+grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,cs, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, mesh size40 mesh, a105n, internals ss304, etsp wd ss316+grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,cs (nace), 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, mesh sizemesh 40, a105n, internals ss 316l, etsp wd ss316+grph, a193gr.b7m/a194gr2hm, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,ss, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plate astm e674, meshastm e2016, mesh size40 mesh, a182 gr.f304, internals ss 304, etsp wd ss316+grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,ss, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, 60 micron filter element, a182 gr.f316, internals ss 316, etsp wd ss316+grph, a193gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002 , strainer y-type,as, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, mesh size40 mesh, a182 gr.f9, internals ss 316, etsp wd ss316+grph, a193 gr.b16/a194gr.4, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002 , strainer y-type,cs (ibr), 800,0, mfg. std., sw ends,b16.11, y type , removable screen,, perforated plate astm e674, mesh astm e2016, mesh size40 mesh, a105n, internals ss304, etsp wd ss316 + grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.ibr certificate in form iiic required, 3.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,cs (ibr), 800,0, mfg. std., sw ends,b16.11, y type , removable screen,, perforated plate astm e674, mesh astm e2016, mesh size40 mesh, a105n, internals ss304, etsp wd ss316 + grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.ibr certificate in form iiic required, 3.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , basket strainer,ss, 300,0, mfg. std., flgd,b16.5,rf, designbasket type, drain & vent conn. 2,flgd,rf, the drain shall be provided at, the side of the strainer at, the bottom., meshastm e2016, meshmesh 40, perforated plate astm e674, refer annexure-1, weld factor e = 1.00, a351 gr.cf8m or, a240 gr.316, wn flg a182 gr.f316, top covera182 gr.f316, spwd ss316 + grph, a193 gr.b8/a194gr.8, screen ss 316, other inter.equivalent to, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002 , basket strainer,ss (h2 ser.), 300,0, mfg. std., flgd,b16.5,rf, designbasket type, drain & vent conn. 2,flgd,rf, the drain shall be provided at, the side of the strainer at, the bottom., meshastm e2016, meshmesh 40, perforated plate astm e674, refer annexure-1, weld factor e = 1.00, a351 gr.cf8m or, a240 gr.316, wn flg a182 gr.f316, top covera182 gr.f316, spwd ss316 + grph, a193 gr.b8/a194gr.8, screen ss 316, other inter.equivalent to, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , strainer t-type,cs, 150,0, tkis drawing, bw ends,sch std, designdrawer type, flanged cover, a234 gr.wpb-s, internals ss304, sp wd ss316+grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area , strainer t-type,cs (nace), 150,0, tkis drawing, bw ends,sch std, designdrawer type, flanged cover, a234 gr.wpb-s, internals ss 316l, sp wd ss316+grph, a193gr.b7m/a194gr2hm, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area, 4.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , strainer t-type,as, 300,0, tkis drawing, bw ends,sch xs, designdrawer type, flanged cover, a234 gr.wp5-s cl.1, internals ss 316, gasksp wd ss316+grph, a193 gr.b16/a194gr.4, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area , strainer t-type,as, 300,0, tkis drawing, bw ends,sch xs, designdrawer type, flanged cover, normalised and tempered, a234 gr.wp9-s cl.1, internals ss 316, gasksp wd ss316+grph, a193 gr.b16/a194gr.4, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area => limited