supply of strainers (lot5) supply of strainers (lot5) for p25 project at iocl panipat refinery , supply of strainers as per material requisition , strainer y-type,cs (ibr), 150,0, mfg. std., flgd,b16.5,rf, bolted cover,removable screen., perforated plate astm e674, mesh astm e2016, mesh size40 mesh, shall be provided with 3/4, threaded tap and solid, threaded plug as drain, for strainer size, 2 and above and 1/2 drain, for below 2., a216 gr.wcb, str.element ss 304, etsp wd ss316 + grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2.ibr certificate in form iiic required, 3.clear strainer area to nominal area, ratio shall be 3(at unclogged condition) , strainer y-type,as, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, mesh size40 mesh, a182 gr.f9, internals ss 316, etsp wd ss316+grph, a193 gr.b16/a194gr.4, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002 , strainer t-type,cs, 150,0, tkis drawing, bw ends,sch std, designdrawer type, flanged cover, a234 gr.wpb-s, internals ss304, sp wd ss316+grph, a193 gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area , strainer t-type,cs (nace+h2), 150,0, tkis drawing, bw ends,sch xs, designdrawer type, flanged cover, a234 gr.wpb-s, internals monel, sp wd ss316+grph, a193gr.b7m/a194gr2hm, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area, 4.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 5.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , strainer t-type,as, 300,0, tkis drawing, bw ends,sch xs, designdrawer type, flanged cover, normalised and tempered, a234 gr.wp9-s cl.1, internals ss 316, gasksp wd ss316+grph, a193 gr.b16/a194gr.4, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002, 2. for strainer dimensional details, refer doc. 6745-pip-000-tb-0008, 3.mesh 5 with 0.041 in. dia. wire and 63%, open area. the effective area of the, screen assembly shall not be less than, 150% of the pipe cross sectional area , strainer y-type,ss, 800,0, mfg. std., sw ends,b16.11, y type , removable screen, perforated plateastm e674, meshastm e2016, 60 micron filter element, a182 gr.f316, internals ss 316, etsp wd ss316+grph, a193gr.b7/a194gr.2h, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0002 => limited