tender for special repairs to road and road furniture at various locations under age b/r ii of ge dssc wellington - scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth not exceeding 50mm complete all as specified and as directed. 2 material and labour for preparing scarifiedtop surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bagsto remove all loose dirt and applying tack coat @ 10 kg per 10 sqm usingbituminous cold emulsion rapid setting grade-1 (rs-1) etc complete all as specified and as directed. 3 material and labour for preparing existing blacktop/ newly laid bituminous macadam surfaces by brushing with wire brushes or using pressure blower and compressor for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bagsto remove all loose dirt applying tack coat @ 5 kg per 10 sqm usingbituminous cold emulsion rapid setting grade-1 (rs-1) etc complete all as specified and as directed. 4 material and labour for preparing newly laid bituminous macadam surfaces by brushing with wire brushes or using pressure blower and compressor for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bagsto remove all loose dirt applying tack coat @ 3.5 kg per 10 sqm usingbituminous cold emulsion rapid setting grade-1 (rs-1) etc complete all as specified and as directed. 5 material and labour for premix bituminous macadam with binder content of 4% by weight of total mix using paving bitumen of vg-30, laid rolled and compacted to required camber and gradient (consolidated thickness 75 mm or less) with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed. 6 material and labour for bituminous premix semi dense asphaltic concrete 40mm consolidated thickness using paving bitumen of grade vg-30 with 5.5% binder content by weight of total mix using hot mix plant and mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed. 7 material and labour for repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm using paving bitumen of vg-10 and putting in premixed bituminous macadam using vg-30, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of hole exceeding 30mmcomplete all as specified and as directed. 8 material and labour for applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to bs-3262 (1989), either continuous or broken lines, stop lines, dashes, arrows etcnot exceeding 10 cm wide over existing or new painting surfaces of cement or bituminous surface, with hot applied thermo plastic road marking paint of approved colour with applicator machine and as per manufactures instruction complete all as specified and as directed. 9 material and labour for applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to bs-3262 (1989), for broken lines, stop lines, dashes, arrows etc exceeding 10 cm wide over existing or new painting surfaces of cement or bituminous surface, with hot applied thermo plastic road marking paint of approved colour with applicator machine and as per manufactures instruction complete all as specified and as directed. 10 supply and fix in repairs solar cat eye aluminium alloy shall (100% water proofing design according to ip 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and as directed. 11 supply and fix in repairs poly carbonate convex mirror outdoor type 1200mm/ 1000mm dia mounted and fixed to 80mm bore medium grade ms pipe of 1000 mm for ngl grouted with 1:2:4 of pcc 300 x 300 x 450mm pcc blocks complete all as specified and as directed. 12 supply and fix in repair two way reflective plastic road stud reflector with abs (acrylonitrile butadiene styrene) body of size 100mmx89mmx18mm to 25mm thick with appropriate adhesive as per manufacture instruction and colour as approved by engg in chargecomplete all as specified and as directed.