tender for completion of incomplete items of works pertaining to repairs to certain roads at ins parundu, ramnad under ge tirunelveli ( tender id : 2019_mes_308945_1 ) - 1 material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer @ 5kg / 10sqm with vg-10 bitumen and laying semi dense asphaltic bituminous premix concrete 40mm consolidated thickness using with paving bitumen grade vg-30 @ 5.5% binder content by weight of total mix and laid with mechanical paver including rolled with 8 to 10 tone capacity power roller, consolidation to required gradient and camber upto edge of roads etc complete all as specified and as directed. 2 scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and exceeding 50mm deep but not exceeding 100mm deep all as specified and as directed. 3 material and labour for preparation of water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer @ 10kg / 10sqm with vg-10 bitumen and laying semi dense asphaltic bituminous premix concrete 40mm consolidated thickness using with paving bitumen grade vg-30 @ 5.5% binder content by weight of total mix and laid with mechanical paver including rolled with 8 to 10 tone capacity power roller, consolidation to required gradient and camber upto edge of roads etc complete all as specified and as directed. 4 material and labour for 75mm thick ( compacted thickness ) water bound macadam ( wbm ) in one layer with coarse aggregates of granite, trap or basalt of grading 2 ( 63 to 40mm size ) , spread, rolled using power roller 8-12 ton capacity and consolidated to camber required etc., complete all as specified and as directed. 5 material and labour for repairs to pot holes any depth, area not exceeding 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5kg / 10sqm with vg-10 bitumen, putting in semi dense asphaltic bituminous premix concrete, using with paving bitumen grade vg-30 @ 5.5% binder content by weight of total mix and laid with mechanical paver including rolled with 8 to 10 tone capacity power roller, consolidation to required gradient and camber upto edge of roads etc complete all as specified and as directed. 6 preparing bituminous surfaces and painting lines, dashes, letter etc exceeding 10 cm wide with water based road mark paint white or golden yellow ( is colour no. 356 ) all as specified and as directed.