tender for balance work of street light in sector-22e yea (wc-e m-02) - supply and laying of aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.pwd-501 50 sq. mm 3-1/2 core 2 supply & fixing of l.t. junction box on pole suitable for out door type operation of size 400x300x200 mm made of 3.0mm crca sheet complete in respect as per annexure. analysis of rates 3 ht networksupply & erection of steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement: 3 coarse sand 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. the rates includes all materials labour & t&p. etc. required for proper completion of work as per direction of e/1. yeidda sor-24 1) 410 sp-55, 1 1 mtr. (approx. wt. 232kg.) 4 s/f of 11 kv polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(jaishree, bhel,rr, hindustan, yamuna, ad, complete in all respect, as directed by engineer in charge. yeida sor-78 5 s/f of hdpe pipe 200 mm dia pe-63/pn-4 including required material ,t&p etc complete in all respect in all ,as directed by engineer in chargeyeida sor- 19 6 s/f of cross arm made of 100x50 mm m.s. channel 2.5 mtr. long on poles with packing, piece, m.s. clamp, nut bolts etc. complete in all respect. analysis of rates yeida sor 30 7 supply, sagging, tensioning, jointing and bending of suitable size acsr conductor conferming to i.s. specification including cost of aluminium wire and jointing sleeve required. the rates includes cost of material, labour, t&p etc. required for proper completion of work as per direction of e/i. p.s.-627, a) wesele conductor. 8 supply & fixing of ms rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised ms rod buried till the top reaches 1.7 mts. below the gl complete with bolts & nuts & gi earth wire 7/14. analysis of rates yeida sor 52 9 s/e of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm g.i. stay wire etc. in1:3:6 cement concrete in all respect. p.s. 630. 10 s/f of 600mm x 600mm x 6.0mm g.i. plate, vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia g.i. pipe & funnel for watering & one earthing lead of one no. 8 to swg gi wire in 15mm dia g.i. pipe upto switch board (from apron to switch board the cost of gi pipe and gi wire will be extra) 30cm square c.i. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. as per direction of engineer-in-charge complete in all respects.(ps-702) 11 supply and laying of 25mmx3mm g.i. strip from earth electrode directly in the ground as required complete in all respect. (ps-716) 12 s/f of 11 kv tpmo set of ‘relco’ make or equivalent with insulators and other accessories required for proper completion of work. analysis of rates yeida sor 56 13 s/f of 11 kv drop-out type fuse set channel type of ‘relco’ or equivalent make with insulators and other accessories required for proper completion of work. analysis of rates yeida sor 57 14 supply, installation, testing and commissioning of out door type distribution transformer. specification and also confirming to is : 1180. level-2as per the directions of the engineer-in-charge analysis of rates (a) 63 kva aluminium wound yeida sor 34