providing street light at village janunchana and hajipur yeida. wc-( e m -02) - street light supply and erection of 8.5 m. long p.c.c. pole, confirming to is 1678-1960, is 343-1960 and is 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. complete with all material, labou, t&p etc. and also including cartage of pole from store to site of works. analysis of rates sor -33 yeida 3 supply and fixing ofled street light fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. confirming to ip 66protection complete in all respect (make philips, crompton, bajaj,) ps-1421 cat-aaa pwd-2018 4 s/e of ‘d’ clamps 50x6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc complete in all respect including with aluminium paint. (ps-623) 5 supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. 25 a tpn uppwd/2018 ps no-807 6 supply, delivery, testing, laying of al. conductor hdpe/xlpe insulated 1100v grade arial bunched cable with messenger wire as below on pole complete in all respect. (cci, gloster, asian, universal, nicco, icl,diamond , havells ,grandley,polycab, kalinga ,suraj, delton,make) analysis of rates2cx25 sqmm. + 25 sqmm. yeida sor -76(b) 7 supply, delivery, testing, laying of al. conductor hdpe/xlpe insulated 1100v grade arial bunched cable with messenger wire as below on pole complete in all respect. (cci, gloster, asian, universal, nicco, icl,diamond , havells ,grandley,polycab, kalinga ,suraj, delton,make)analysis of rates 3cx50 sqmm. + 25 sqmm+35 sq mm.yeida sor -76(c) 8 s/f of 16sqmm. to 50 sqmm. l.t. a.b.c. connector on pole, complete in all respect. analysis of rates yeida sor-36 9 s/f of 40mm. dia 1.5mtr. long g.i. pipe ‘b’ class bracket with 2 nos. ‘d’ clamps 50x6mm. flat iron on steel tubular pole/ steel rail pole / pcc pole with bolts, nuts etc. complete in all respect analysis of rates yeida sor -35 10 s/f of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the engineer-in-charge. ps-504 (a), 25 sqmm. 11 s/f of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the engineer-in-charge. ps-504 (b), 50 sqmm. 12 s/f of xlpe insulated copper un-armoured cable 1100v grade etc conductor xlpe insulated, un-armoured cable .3c x 1.5 sqmmanalysis of rates yeida sor 1 make -cci,gloster,asian,universal,nicco,icl,diamond ,havells ,kei 13 supply & fixing of l.t. junction box on pole suitable for out door type operation of size 400x300x200 mm made of 3.0mm crca sheet complete in respect as per annexure. analysis of rates 14 supply & erection of screw tightener analysis of rates yeida sor- 37 15 supply & fixxing of stay insulator with stay wire analysis of rates yeida sor- 38 16 s/e of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm g.i. stay wire etc. in1:3:6 cement concrete in all respect. p.s. 630. 17 numbering of poles with combination of yellow and black colour paint etc. complete in all respects as per direction of e/i at site. analysis of rates 18 ht networksupply & erection of steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement: 3 coarse sand 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. the rates includes all materials labour & t&p. etc. required for proper completion of work as per direction of e/1. yeidda sor-24 1) 410 sp-55, 1 1 mtr. (approx. wt. 232kg.) 19 s/f of 11 kv polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(jaishree, bhel,rr, hindustan, yamuna, ad, complete in all respect, as directed by engineer in charge. yeida sor-78 20 s/f of hdpe pipe 200 mm dia pe-63/pn-4 including required material ,t&p etc complete in all respect in all ,as directed by engineer in chargeyeida sor- 19 21 s/f of cross arm made of 100x50 mm m.s. channel 2.5 mtr. long on poles with packing, piece, m.s. clamp, nut bolts etc. complete in all respect. analysis of rates yeida sor 30 22 supply, sagging, tensioning, jointing and bending of suitable size acsr conductor conferming to i.s. specification including cost of aluminium wire and jointing sleeve required. the rates includes cost of material, labour, t&p etc. required for proper completion of work as per direction of e/i. p.s.-627, a) wesele conductor. 23 supply & fixing of ms rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised ms rod buried till the top reaches 1.7 mts. below the gl complete with bolts & nuts & gi earth wire 7/14. analysis of rates yeida sor 52 24 s/e of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm g.i. stay wire etc. in1:3:6 cement concrete in all respect. p.s. 630. 25 s/f of 600mm x 600mm x 6.0mm g.i. plate, vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia g.i. pipe & funnel for watering & one earthing lead of one no. 8 to swg gi wire in 15mm dia g.i. pipe upto switch board (from apron to switch board the cost of gi pipe and gi wire will be extra) 30cm square c.i. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. as per direction of engineer-in-charge complete in all respects.(ps-702) 26 supply and laying of 25mmx3mm g.i. strip from earth electrode directly in the ground as required complete in all respect. (ps-716) 27 s/f of 11 kv tpmo set of ‘relco’ make or equivalent with insulators and other accessories required for proper completion of work. analysis of rates yeida sor 56 28 s/f of 11 kv drop-out type fuse set channel type of ‘relco’ or equivalent make with insulators and other accessories required for proper completion of work. analysis of rates yeida sor 57 29 supply, installation, testing and commissioning of out door type distribution transformer. specification and also confirming to is : 1180. level-2as per the directions of the engineer-in-charge analysis of rates (a) 63 kva aluminium wound yeida sor 34 30 electrician/operator complete in all respect, as directed by engineer in charge yeida sor-50 (operation duration will start after date of work complition) 31 (village- hajipur )street light supply and erection of 8.5 m. long p.c.c. pole, confirming to is 1678-1960, is 343-1960 and is 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. complete with all material, labou, t&p etc. and also including cartage of pole from store to site of works. analysis of rates sor -33 yeida 32 supply and fixing ofled street light fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. confirming to ip 66protection complete in all respect (make philips, crompton, bajaj,) ps-1421 cat-aaa pwd-2018 33 s/e of ‘d’ clamps 50x6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc complete in all respect including with aluminium paint. (ps-623) pwd -2018 34 supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. 25 a tpn uppwd/2018 ps no-807 35 supply, delivery, testing, laying of al. conductor hdpe/xlpe insulated 1100v grade arial bunched cable with messenger wire as below on pole complete in all respect. (cci, gloster, asian, universal, nicco, icl,diamond , havells ,grandley,polycab, kalinga ,suraj, delton,make) analysis of rates2cx25 sqmm. + 25 sqmm. yeida sor -76(b) 36 supply, delivery, testing, laying of al. conductor hdpe/xlpe insulated 1100v grade arial bunched cable with messenger wire as below on pole complete in all respect. (cci, gloster, asian, universal, nicco, icl,diamond , havells ,grandley,polycab, kalinga ,suraj, delton,make)analysis of rates 3cx50 sqmm. + 25 sqmm+35 sq mm.yeida sor -76(c) 37 s/f of 16sqmm. to 50 sqmm. l.t. a.b.c. connector on pole, complete in all respect. analysis of rates yeida sor-36 38 s/f of 40mm. dia 1.5mtr. long g.i. pipe ‘b’ class bracket with 2 nos. ‘d’ clamps 50x6mm. flat iron on steel tubular pole/ steel rail pole / pcc pole with bolts, nuts etc. complete in all respect analysis of rates yeida sor -35 39 s/f of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the engineer-in-charge. ps-504 (a), 25 sqmm. 40 s/f of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the engineer-in-charge. ps-504 (b), 50 sqmm. 41 s/f of xlpe insulated copper un-armoured cable 1100v grade etc conductor xlpe insulated, un-armoured cable .3c x 1.5 sqmmanalysis of rates yeida sor 1 make -cci,gloster,asian,universal,nicco,icl,diamond ,havells ,kei 42 supply & fixing of l.t. junction box on pole suitable for out door type operation of size 400x300x200 mm made of 3.0mm crca sheet complete in respect as per annexure. analysis of rates 43 supply & erection of screw tightener analysis of rates yeida sor- 37 44 supply & fixxing of stay insulator with stay wire analysis of rates yeida sor- 38 45 s/e of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm g.i. stay wire etc. in1:3:6 cement concrete in all respect. p.s. 630. 46 numbering of poles with combination of yellow and black colour paint etc. complete in all respects as per direction of e/i at site. analysis of rates 47 ht networksupply & erection of steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement: 3 coarse sand 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. the rates includes all materials labour & t&p. etc. required for proper completion of work as per direction of e/1. yeidda sor-24 1) 410 sp-55, 1 1 mtr. (approx. wt. 232kg.) 48 s/f of 11 kv polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(jaishree, bhel,rr, hindustan, yamuna, ad, complete in all respect, as directed by engineer in charge. yeida sor-78 49 s/f of hdpe pipe 200 mm dia pe-63/pn-4 including required material ,t&p etc complete in all respect in all ,as directed by engineer in chargeyeida sor- 19 50 s/f of cross arm made of 100x50 mm m.s. channel 2.5 mtr. long on poles with packing, piece, m.s. clamp, nut bolts etc. complete in all respect. analysis of rates yeida sor 30 51 supply, sagging, tensioning, jointing and bending of suitable size acsr conductor conferming to i.s. specification including cost of aluminium wire and jointing sleeve required. the rates includes cost of material, labour, t&p etc. required for proper completion of work as per direction of e/i. p.s.-627, a) wesele conductor. 52 supply & fixing of ms rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised ms rod buried till the top reaches 1.7 mts. below the gl complete with bolts & nuts & gi earth wire 7/14. analysis of rates yeida sor 52 53 s/e of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm g.i. stay wire etc. in1:3:6 cement concrete in all respect. p.s. 630. 54 s/f of 600mm x 600mm x 6.0mm g.i. plate, vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia g.i. pipe & funnel for watering & one earthing lead of one no. 8 to swg gi wire in 15mm dia g.i. pipe upto switch board (from apron to switch board the cost of gi pipe and gi wire will be extra) 30cm square c.i. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. as per direction of engineer-in-charge complete in all respects.(ps-702) 55 supply and laying of 25mmx3mm g.i. strip from earth electrode directly in the ground as required complete in all respect. (ps-716) 56 s/f of 11 kv tpmo set of ‘relco’ make or equivalent with insulators and other accessories required for proper completion of work. analysis of rates yeida sor 56 57 s/f of 11 kv drop-out type fuse set channel type of ‘relco’ or equivalent make with insulators and other accessories required for proper completion of work. analysis of rates yeida sor 57 58 supply, installation, testing and commissioning of out door type distribution transformer. specification and also confirming to is : 1180. level-2as per the directions of the engineer-in-charge analysis of rates (a) 63 kva aluminium wound yeida sor 34