bids are invited for providing and supplying luxury emulsion - providing and supplying luxury emulsion of approved make on internal wall surface as detailed below scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20percent allowing to dry for 6 to 8 hoursafter supplying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. scrapping with emery paper and wipe clean supplying paints luxury emulsion 1st coat with brush water content water 40 to 45percent or 65 to 70percent by role supplying paints luxury emulsion 2nd coat with brush with water content 40 to 45percent or 65 to 70 percent by roller. with prior approval of s.e. , providng and fixing in position anodised extruded aluminum partitions - providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with bwp type exterior grade phenol formaldehyde synthetic resin conforming to is 128231990, laminated on both sides,novateakor equivalent and 5 mm thick selected quality plain float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete , providing and supplying priming coat on concrete masonary asbestos - providing and supplying priming coat on concrete masonary asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. , providing and supplying two coats of exterior weather shield paint - providing and supplying two coats of exterior weather shield paint of approved manufacture and of approved shade to the plastered surfaces inclu