bids are invited for providing and supplying priming coat on concrete masonary - providing and supplying priming coat on concrete masonary asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. , providing and supplying two coats of exterior weather shield - providing and supplying two coats of exterior weather shield paint of approved manufacture and of approved shade to the plastered surfaces including cleaning ,preparing the plaster surface ,supplying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. note for item one number 15 to 18 prior approval of superintending engineer will be necessary , providing and supplying water proofing treatment using acrylic polymer modified cement based water proofing coating - providing and supplying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid 2 1 by weight covering 9 to 10 square metre kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on stamp papers etc. complete. , providing and supplying luxury emulsion of approved make on internal wall surface - providing and supplying luxury emulsion of approved make on internal wall surface as detailed below scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 or water by 15 to 20 allowing to dry for 6 to 8 hoursafter supplying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. scrapping with emery paper and wipe clean supplying paints luxury emulsion 1st coat with brush water content water 40 to 45 or 65 to 70 by role supplying paints luxury emulsion 2nd coat with brush with water content 40 t