supply materials for mgnregswork 1 anganwadi and 8 roads , quarry waste , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand (zone iii) , portland cement , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , stone for masonry work , through and bond stone size 24 x 24 x 39cm , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butt hinges 50x37x1.50 mm , second class kail wood in planks , second class kail wood in scantling , hollock ballies 125 mm diameter , adjustable span eso+si (2.35-3.40) , anjili wood scantls , 200 mm aluminium aldrop , brass 100 mm mortice latch and lock with 6 levers without pair of handles , iron hooks & eyes 100 mm , wall form panel 1250x500 mm , corner angle 45x45x5 mm 1.50 m long , 100 mm channel shoulder 2.5 m long , double clip (bridge clip) , anodised aluminium tower bolt (barrel type) 200x10 mm , m.s. tube 40 mm dia , twisted steel/deformed bars , stone aggregate(single size): 10 mm nominal size , laterite stone of size 35x20x20cm , pair anodised aluminium lever handles for 100 mm mortice latch and lock , anodised aluminium hanging type door stopper , anodised aluminium handles 125 mm with plate 175 x 32 mm , fine sand (zone iv) , vitrified floor tile 60x60 cm , ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc. , ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black , aluminium t or l sections , chromium plated brass screws 20 mm , powder coating 50 microns on aluminium sections , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , neoprene / epdm rubber gasket , anodised aluminium butt hinges 100x75x4 mm , flats up to 10 mm in thickness , mild steel round bar 12 mm dia and below , welding by electric plant , 24 mm thick factory made shutters with styles, rails and panels of pvc extruded sections in white, grey or wooden finish , water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre , plastic emulsion paint , synthetic enamel paint in black or chocolate shade , pvc pipe 32 mm outer dia. 10kgf/cm2 , pvc pipe 50 mm outer dia.6kgf/cm2 , pvc pipe 20 mm outer dia 6kgf/cm2 , pvc pipe 110 mm outer dia 6kgf/cm2 , polyethylene water storage tank with cover and suitable locking arrangemnet , c.p. brass angle valve 15 mm , brass bib-cock-15 mm dia , material - 75 mm valve , ptmt - towel rail (600 mm) , anodised aluminium butt hinges 75x63x4 mm , interlocking c.c. paver block (60 mm thick, m-30) , vitreous china orrisa type w.c. pan size 580 mm , flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) , 100 mm s.c.i. trap with vent heel , vitreous china flat back wash basin 550x400 mm , 15 mm c.p.brass tap , c.p. brass waste 32 mm , c.i. bracket for wash basin and sinks , stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm , stone aggregate(single size):20 mm nominal size , gi trafford profile sheet 0.35mm thick