tender for mgnregs works material supply 10 works (road concreting, work shed) material supplying , materials , portland cement , coarse sand (zone iii) , laterite stone of size 35x20x20cm , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm nominal size , twisted steel/deformed bars , second class kail wood in planks , second class kail wood in scantling , fine sand (zone iv) , anjili wood scantls , aluminium t or l sections , chromium plated brass screws 20 mm , powder coating 50 microns on aluminium sections , anodised aluminium butt hinges 100x75x4 mm , neoprene / epdm rubber gasket , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butt hinges 50x37x1.50 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , anjili wood planks , mild steel round bar above 12 mm dia , flats up to 10 mm in thickness , red oxide zinc chromate primer , rawl plug 50 mm (designation 10 nos) , brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles , anodised aluminium tower bolt (barrel type)300x10 mm , chromium plated brass screws 30 mm , anodised aluminium handles 125 mm with plate 175 x 32 mm , chromium plated brass screws 25 mm , water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre , plastic emulsion paint , ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc. , mild steel tubes hot finished welded type , welding by electric plant , structural steel such as tees, angles, channels and r.s. joists , g.i. plain washer thick , bitumen washer , galvanised steel j or l hooks 8 mm dia , precoated glavanished iron profile sheet 0.50 mm tct , precoated galvanised steel plain ridges , royalty for good earth , quarry waste , r.c.c. pipes np2 class 450 mm dia , r.c.c. collars np2 class 450 mm dia , spalls/blasted rubble , stone boulder , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , construction of chamber for 100mm sluices valve