supply of materials of anganwadi , supply of materials , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand (zone iii) , portland cement , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , stone for masonry work , through and bond stone size 24 x 24 x 39cm , stone aggregate(single size): 10 mm nominal size , solid blocks of size 40x20x20cm , twisted steel/deformed bars , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , adjustable span eso+si (2.35-3.40) , adjustable telescopic prop 3 m (2.02-3.75m) , beam clamp 300-380 mm (450-1070 mm) , anjili wood scantls , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butt hinges 50x37x1.50 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , anjili wood planks , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , fine sand (zone iv) , bright finished or black enameled mild steel butt hinges 125x65x2.12 mm , bright finished or black enameled mild steel screws 50 mm , mild steel round bar above 12 mm dia , flats up to 10 mm in thickness , oxidised mild steel tower bolt (barrel type) 200x10 mm , oxidised mild steel screws 30 mm , oxidised mild steel handles 125 mm , oxidised mild steel screws 25 mm , brass 100 mm mortice latch and lock with 6 levers without pair of handles , pair anodised aluminium lever handles for 100 mm mortice latch and lock , 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish , 24 mm thick factory made shutters with styles, rails and panels of pvc extruded sections in white, grey or wooden finish , iron hooks & eyes 100 mm , pvc pipe 110 mm outer dia. 4kgf/cm2 , pvc bend 110 mm dia