tender for general- sitc of lan at south circle, roads, thiruvananthapuram -lan-general electronics work - supply and installation of 19-inch 15u/550x600 wall mounting network rack conforms to din 41494 or equivalent standard with powder coated finish, top & bottom cover: welded to frame with cable entry exit cut outs, front door: lockable toughened glass door, equipment mounting: din std. 10mm sq. slots, including accessories such as cable organizers, power distribution unit, cooling fans, rack ground kit, wall mounting kit etc. approved make: hcl, netrack, president, rittal, valrack 3 od271967/2024-2025:supply, installation, testing and commissioning of 1kva line interactive ups with ≥30 minutes battery back up on full load for network rack.warranty 3 year for ups and 2 year for battery. approved make: apc, eaton, vertiv, v guard or equivalent 4 od271968/2024-2025:supply and installation of layer 2 manageable 26 port ethernet switch which having 24 x 10/100/1000 mbps + 2 x gigabit sfp ports, web manageable supporting ipv6 having 256 mb ram, switching capacity: 52gbps, ac 120/230v. warranty: 3 year. approvedmake: allied telesis, brocade, cisco, hp, juniper, netgear 5 od272977/2024-2025:supply and installation of 1g single mode duplex sfp module. approved make: cisco, belden, brocade, aruba, netgear or syrotech 6 od272974/2024-2025:supply and installation of fiber splice closure box support 6 core fiber cable with fully cushioned splice holder containing grooves for fixing splice protection sleeves, cable spools made up of flame retardant plastic, high impact resistance, stack-able design for providing sufficient room for storage of excess cables, blanking plates, pigtail, etc. including splicing charges 7 od272975/2024-2025:supply & providing sc-lc/lc-lc duplex patch cord 1 mtr. approved make: commscope, molex, r&m, sterlite or equivalent 8 od272972/2024-2025:supply and installation of manageable wi-fi -6 wireless access points having following specifications: indoor dual band wi-fi access point with smoke detector appearance. frequency: 2.4ghz and 5ghz, wireless mode: dual band 2x2 (2.4ghz and 5.0ghz) 4 streams of data for an aggregate throughput of up to 1.8gbps. power over ethernet (poe), vlan support, antennas: internal 3.8/4.5dbi (2.4ghz/5ghz) bidirectional multi-user mimo. certifications: wi-fi alliance certified (wfa) 802.11ax, with (wi-fi 6), wpa2, wpa3, security: wi-fi protected access (wpa/wpa2/wpa3), 802.11i, mac address filtering, guest network etc. including all accessories such as power adaptor, mounting kit, connecting cat-6 patch cords as per site condition, etc. approved make: netgear , aruba or equivalent 9 od272973/2024-2025:supply and installation gigabit poe injector which fully conforms to the standard ieee802.3 at for transmitting power through ethernet cable distance up to 100 meters. poe budget: poe+ up to 30w. transmissionrate:1000mbps. certifications: fcc, ce, rohs, ul. warranty for 3 years. approved make: allied telesis, tp-link, tenda, ubiquiti, aruba or equivalent 10 od271969/2024-2025:supply and fixing 24 port enhanced cat-6 fully loaded modular type patch panel as per eia/tia-tsb 40a specification for interconnecting servers and clients, including termination charges. preferred make: actassi, belden, panduit, r&m, molex 11 od271970/2024-2025:supply, installation, testing, and commissioning of ul listed, etl verified 0.5 meter cat 6 utp patch cord having lszh jacket, 24 awg bare copper conductor utp 4 pair both end factory crimped with modular male plugs with minimum 500 insertion cycles terminiated as per tia/eia 568-b colour code conforming to the standards ansi/tia-568.2 , iso/iec11801, ieee 802.3, iso/iec 60332-1,and rohs complaint. approved make: molex, honeywell, commscope, norden 12 od271974/2024-2025:supply and installation of cat-6 information outlet for 1000mbps having spring shutter / dust cover face plate with one number of rj45 keystone socket in the existing cms/existing pvc box including termination charges etc. approved make: actassi, belden, molex, commscope, randm 13 od271975/2024-2025:supply and installation of cat-6 information outlet for 1000mbps having spring shutter / dust cover dual face plate with two numbers of rj45 keystone sockets in the existing cms/pvc box including termination charges etc. approved make: actassi, belden, molex, r and m 14 od47518/2025-2026:supplying, laying, certification and documentation of 23 awg cat-6 utp 4 pair lan cable with lszh (low smoke zero halogen)through the existing surface/recessed steel/pvc conduit/cms/cassing and cappingas required. approved make: actassi, belden, molex, r and m 15 od271981/2024-2025:supply and fixing 1 module ul certified pvc box on surface. approved make: honeywell, legrand, l and t, mk 16 od272999/2024-2025:supplying and fixing following size/ modules, gi box alongwith modular base and cover plate for modular switches in recess etc as required.1 or 2 module (75mmx75mm) 17 od271982/2024-2025:supply, installation, testing, and commissioning of ul listed, etl verified 2 meter cat 6 utp patch cord having lszh jacket, 24 awg bare copper conductor utp 4 pair both end factory crimped with modular male plugs with minimum 500 insertion cycles terminiated as per tia/eia 568-b colour code conforming to the standards ansi/tia-568.2 , iso/iec11801, ieee 802.3, iso/iec 60332-1,and rohs complaint . approved make: molex, honeywell, commscope, norden 18 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 19 1.21.2:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 20 90.9.1.1:supply and fixing 50 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.50x50mm cable management system with base and lid 21 90.9.1.2:supply and fixing 50 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.external angle 90 degree 22 90.9.1.3:supply and fixing 50 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.flat angle 90 degree /tee 23 90.9.1.4:supply and fixing 50 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.internal angle 90 degree 24 90.9.1.7:supply and fixing 50 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.end cap 25 90.9.2.1:supply and fixing 100 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm cms with base and lid 26 90.9.2.3:supply and fixing 100 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.external angle 90 degree 27 90.9.2.4:supply and fixing 100 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.flat angle 90 degree 28 90.9.2.5:supply and fixing 100 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.internal angle 90 degree 29 90.9.2.8:supply and fixing 100 x 50 mm pvc cable management system with base and lid along with the following accessories conforming to iec 61084/ bs 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.end cap 30 od273029/2024-2025:permanent labelling in rack, information outlets etc. a label in the rack should show the department name, contractor no. and assistant engineer no. and date of completion and date expiry of dlp. 31 od273030/2024-2025:dismantling and refixing of existing switches, patch panels, network cables, racks, information outlets, pvc conduits etc, including conduits. 32 od153947/2025-2026:supply and installation of necessary electrical accessories for the distribution ofkseb power in to ups in a structured way, including necessary suitable multistrand cables,sockets, switches, electrical pvc boxes etc.as per the site condition.