tender for under the electricity secondary works division-gorakhpur for the construction of 33kv line bhedia from 220/132/33kv s/s gopala maharajganj under the head of business plan year 2025-26. on the semiturnkey basis - 33 kv ‘xlpe’ c/j kit 3x300mm² outdoor 3 33 kv “v” type cross arm 4 clamp for 33 kv v type cross arm with bolts and nuts 5 providing 6” dia.ms g.i. pipe 3m long 6 f-bracket for 33 kv 7 danger plate with clamp and nut & bolt 8 g i barbed wire 9 nut bolt and washer all sizes 10 ‘e’ bracket for 33 kv 11 top channel 125x65 mm, 3200 mm long 12 holding clamp for top,ms channel & dropper 13 pg clamp dog to dog 14 bracing set 4.3 x 4.3 mtr angle iron 65x65x6 mm with holding clamp 15 m.s. dropper/m s channel 100x50 mm 2400 mm long 16 holding clamp for gi pipe &cable 17 lug for acsr dog conductor 18 stay clamp 19 stay rod 20x1800mm 20 staywire 7/8 swg 21 ms guarding angle with clamp 22 gi wire 6 swg 23 gi wire 8 swg 24 earthing rod 20x2500 25 33kv polymer pin insulator 26 disc fitting 33kv 27 disc insulator 33kv 28 al. paint 29 red oxidepaint 30 part – b- workshifting,loading and carriageof following materials on private truck at store centre maharajganj & un-loading of the same with proper stacking at work site . 31 p.c.c.pole9m long 32 s.t. pole – 11 mtr. long 33 33 kv ‘xlpe’ cable 3x300mm² 34 acsr ‘dog’ conductor 35 laying of 33 kv 3x300 mm² ‘xlpe’ cable with sand & brick and back filling/ hdd method by drillingmachine as per site requirement. 36 laying of 33kv ‘xlpe’ cable in air and loop 37 cable jointing charges of 33 kv xlpe cable outdoor. 38 gi pipeearthing complete forcable jointing kit with materials 39 erection of single pole structure on 9 mtr pcc pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( v type cross arm 100 x 50 x 6 mm, m.s. channel (7.9 kg./m) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp,barbed wire earthing, etc. complete as per resspo). 40 erection of double pole structure on 9 mtr pcc poleincluding all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,barbed wire earthing, etc. complete as per resspo) . 41 erection of four pole structure on 9 mtr pcc poleincluding all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,barbed wire earthing, etc. complete as per resspo) . 42 erection of double pole structure on 9 mtr pcc pole for one side o/h and one side cable rising including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (droper chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . 43 erection of single pole structure on 11mtr st. (sp-55) pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( v type cross arm 100 x 50 x 6 mm, m.s. channel (7.9 kg./m) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per resspo. 44 erection of double pole structure on 11 mtr st pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per resspo) . 45 erection of four pole structure on 11 mtr st pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per resspo) . 46 erection of double pole structure on11 mtr stp pole for one side o/h and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (droper chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . 47 laying, spreading, lifting and final sagging of 3 phases of acsr dog conductorin accordance with profile and sag chart including binding, jumpering and fixing of p.g. clamp as per requirement in 03 nos. conductor in parallel. 48 grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. 49 chopping of branches of trees of eucalyptus, neem, keekar and other kind of trees along the route of the line and disposal of the same at suitable place. 50 guarding between two poles like single poles, double poles, four poles, etc. to guard lt, 11 kv line telephone and river crossing, road crossing etc. with g.i. wire no. 6 swg and g.i. wire no. 8 swg, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.